Basic Features
Memorizing Channels
Auto Tuning
Menu → Broadcasting → Auto Tuning
Automatically scans and indexes all channels received through the TV's aerial input connector. To start, navigate to Broadcasting and select Auto Tuning.
Select Start when prompted with a message. This initiates the Auto Tuning function. The process can take up to 30 minutes to complete. If Starting the Auto Tuning function when there is an existing index of channels overwrites the previous index.
<For DTV models>
•• Aerial
Before your product can memorize the available channels, you must select your Product signal source, Air (using an aerial). After you have selected the signal source, go on to the Auto Tuning function.
✎✎Selecting the signal source using the Aerial function also determines the signal source the product is tuned to.
•• Channel Type
Select Digital & Analogue, Digital or Analogue to scan for channels. ✎✎Some areas are only available for analogue channels.
<For Analogue TV models>
•• Search Mode
Set your search mode (Full/Turbo). (Some areas don't support.) Then press Scan to find channels. Select Close to finish it.
English - 37