rubens_monitor_eng 1/28/03 8:40 PM Page 9
Viewing the Connection Panel (continued)
ŒConnecting an Aerial or Cable Television Network (depending on the model)
To view television channels correctly, a signal must be received by the set from one of the following sources:
-An outdoor aerial
-A cable television network
-A satellite network
´Connecting Computer
-Connect the 15 Pin
-Connect the stereo audio cable to ”Audio (ST)” on the rear of your set and the other end to “Audio Out” of the sound card on your computer.
-If necessary, please install monitor driver contained on the accompanied CD. For more information, refer to the driver installation instructions included with your CD package.
➣15 Pin D-SUB connector
Pin | Separate H/V | Composite H/V |
|
|
|
|
|
1 | Red (R) | Red (R) | Red (R) |
2 | Green (G) | Green (G) | Green (G) + Horizontal/Vertical sync. |
3 | Blue (B) | Blue (B) | Blue (B) |
4 | Grounding | Grounding | Grounding |
5 | Grounding (DDC) | Grounding (DDC) | Grounding (DDC) |
6 | Red (R) Grounding | Red (R) Grounding | Red (R) Grounding |
7 | Green (G) Grounding | Green (G) Grounding | Green (G) Grounding |
8 | Blue (B) Grounding | Blue (B) Grounding | Blue (B) Grounding |
9 | No connection | No connection | Not used |
10 | Sync Grounding | Sync Grounding | Sync Grounding |
11 | Grounding | Grounding | Grounding |
12 | Data (DDC) | Data (DDC) | Data (DDC) |
13 | Horizontal sync. | Horizontal/Vertical sync. | Not used |
14 | Vertical sync. | Not used | Not used |
15 | Clock (DDC) | Clock (DDC) | Clock (DDC) |
|
|
|
|