Samsung RS21ASSSS/VNT manual Choosing the MTS Multichannel Television Stereo

rubens_monitor_eng 1/28/03 8:40 PM Page 26

Choosing the MTS (Multichannel Television Stereo)

Sound

Mode ￿Custom ®

Bass

Treble

Dolby		:	On
Speaker		:	On
MTS		￿	Mono	®
TTX/MIX			V.DOLBY
HOLD	DUAL I/II		CANCEL
SLEEP	SUBPAGE	SIZE	PIP
			ON
P.SIZE	PBP		LOCATE

Depending on the particular program being broadcast, you can listen to Stereo, Mono, or Dual I/II (Dual I/II is usually a foreign-language translation).

1Press the MENU button.

Result: The main menu is displayed.

2Press the P▼ or P▲ button to select the Sound.

Result: The options available in the Sound group are displayed.

3Press the - or + button.

4Press the P▼ or P▲ button to select the MTS.

5Select the required sound mode by pressing the - or + button repeatedly. The sound modes are displayed in the following order: Mono - Stereo - Dual I - Dual II..

You can also set these options simply by pressing the DUAL I/II button. The “DUAL I/II” button displays/controls the processing and output of the audio signal.

➣◆ If the receiving conditions deteriorate, listening will be easier if the mode is set to the Mono.

◆If the stereo signal is weak and an automatic switching occurs, then switch to the Mono.

◆When receiving a mono sound in the AV mode, connect to the “AUDIO (L)” connector on the rear panel.

English-26