SETTING UP PLAY BACK FUNCTIONS
MIC / UP button
When the LCD monitor is turned on, pressing the UP ( 
) button will either cause the cursor to move up or change a selected sub menu.
When the LCD monitor is not turned on, pressing the UP ( 
) button will allow a sound recording to be added to a stored still image.
1.Turn the camera on.
2.Rotate the mode dial to PLAY mode.
3.Press the LEFT ( 
) / RIGHT ( 
) buttons to select the image that you wish to add sound to.
4.Press MIC ( 
) button and the sound recording indicator will display. The sound is being recorded.
5.Recording can be stopped by pressing the MIC ( 
) button again. The sound will record for 10 seconds.
PLAY & PAUSE / DOWN button
10SEC
REC
2002/ 1/ 1/ 00 : 00
[ Being recorded ]
ADVANCED
When the LCD monitor is turned on, pressing the DOWN ( 
) button will move the cursor down or change the sub menu.
When the LCD monitor is not turned on, the DOWN ( 
) button is used as the PLAY &
PAUSE (
) button.
The PLAY & PAUSE (
) button is used for playing and pausing a sound recorded still image, movie clip or slide show.
1.Turn the camera power on.
2.Rotate the mode dial to PLAY mode.
3.Press the LEFT ( 
) / RIGHT ( 
) buttons to select a sound recorded still image or a movie clip. Or, select slide show.
4.Press PLAY & PAUSE (
) button.