Instructions
Use this camera in the following order
Set up the
camera driver
Take a picture
Insert the
USB cable
Check the
camera’s power
Check
[Removable Disk]
Before connecting the camera to a PC, via the USB cable, you will need to set up the camera driver. Install the camera driver that is contained in the Application S/W
Take a picture (p.20)
Insert the supplied USB cable into the PC’s USB port and the camera’s USB connection terminal.(p.91)
Check the camera’s power
If the power is turned off, press the camera button to power it on.
Open Window s EXPLORER and search for [Removable Disk].(p.92)
If you use a card reader to copy the images on the memory card to your PC, the images could be damaged. When transferring the images taken with the camera to your PC, be sure to use the supplied USB cable to connect the camera to your PC. Please note that the manufacturer holds no responsibility for loss or damage of images on the memory card due to the use of a card reader.
2