LCD monitor indicator
14 | White Balance |
| p.35 |
15 | RGB |
| p.35 |
16 | Image quality |
| p.41 |
17 | Image size/ Continuous shot | 2048, 1600, 1024, 640 | p.41 |
| Number of available shots remaining | 28 |
|
18 | Remaining time | 00:01:30/ 01:00:00 |
|
|
| ||
| (Movie clip/ Voice recording) |
| |
|
|
| |
19 | Optical/ Digital Zoom rate |
|
|
Starting the recording mode
How to use the AUTO mode ( 
)
1. Insert the batteries. (p.16)
Insert the batteries taking note of the polarity (+ / -).
2. Insert the memory card. (p.19)
3. Close the battery chamber cover.
4. Press the power button to turn on the camera.
(If the date/time that is displayed on the LCD monitor is incorrect, reset the date/time before taking a picture.)
5. Select the AUTO mode by rotating the mode dial.
6. Point the camera towards the subject and compose the image by using either the viewfinder or LCD monitor.
7. Press the shutter button to capture an image.
[ AUTO mode ]
INFORMATION
If the auto focus frame turns to red when you press the shutter button down half way, it means that the camera cannot focus on the subject. Should this be the case, the camera is unable to capture an image clearly.
21