Sound
If you set the operation sound to ON, various sounds will be activated for camera startup, when button are pressed, and if there is a card error, so that you can be aware of the camera operation status.
Setting Operation Sounds
1.In any mode with the exception of Voice Recording mode, press the MENU button.
2.Press the LEFT/ RIGHT button and select the [SETUP] menu tab.
3.Select the [SOUND] menu by pressing the UP/ DOWN button and press the RIGHT button.
4.Select a desired sub menu by pressing the UP/ DOWN button and press the OK button.
[SOUND] sub menu : OFF/ LOW/ MEDIUM/ HIGH
5.Press the menu button twice and the menu will disappear.
| SETUP |
D & TIME | OFF |
IMPRINT | LOW |
SOUND | MEDIUM |
BACK: | SET:OK |
LCD brightness
You can adjust the LCD brightness.
Adjusting LCD Brightness
1.In any mode with the exception of Voice Recording mode, press the MENU button.
2.Press the LEFT/ RIGHT button and select the [SETUP] menu tab.
3.Select the [LCD] menu by pressing the UP/ DOWN button and press the RIGHT button.
4.Select a desired sub menu by pressing the UP/ DOWN button and press the OK button.
[LCD] sub menu : DARK, NORMAL, BRIGHT
5.Press the menu button twice and the menu will disappear.
| SETUP |
IMPRINT | DARK |
SOUND | NORMAL |
LCD | BRIGHT |
BACK: | SET:OK |
69