WASHING CLOTHES MANUALLY
You can wash clothes manually without using the Fuzzy Logic feature.
To do so:
1.Turn on the water at the water source sink.
2.Press the 
(On/Off ) button on the washing machine.
3.Open the door.
4.Load the articles one at a time loosely into the drum, without overfilling.
5.Close the door.
6.Put the detergent in the detergent drawer 
.
7.Repeatedly press the Program button to select the cycle you prefer: Cotton, Coloureds, Synthetics, and Quickwash...
8.Press the Spin button to select the spin speed (No Spin, 400, 800,...,No Spin,...)
9.Repeatedly press the Option button to select the cycle you prefer (Prewash, Rinse+, Rinse hold, ... )
10.Press the Temperature button to select the temperature (cold water , 30˚C, 40˚C, 60˚C, 95˚C).
11.Press the Start/Pause button and the machine will begin the cycle.
When the cycle is finished:
1.Open the door.
The door will not open until 3 minutes after the machine stops or the power turns off.
2.Remove laundry.
The Slow rotation of drum is not fail of the machine after the last spin of Cotton, Coloureds or Quickwash course. That is a function to remove laundry easily.
SELECTING OPTIONS
Prewash
Prewash is only available when washing cotton, Coloureds, synthetics, delicate clothes.
To use prewash:
1.Load the prewash detergent into compartment of 
the detergent drawer.
2.Select “Cotton”, ”Coloureds” or ”Synthetic” with the Program select button.
3.Press the Option button until the “Prewash” indicator lights up on the control panel.
4.Press Start/Pause to begin the cycle.
Rinse+
Your machine will run through an additional rinsing cycle.
The washing duration will be prolonged accordingly.
Rinse Hold
The laundry remains soaking in the final rinse water.
Before the laundry can be unloaded, the “Spin” program must be run.
Washing a load of laundry _11
02 Washing a load of laundry
