ADJUST THE CLEARANCE BETWEEN THE DOORS
Making small adjustments between doors.
If the door of freezer is higher than that of the refrigerator.
Please open the doors and adjust the doors as follows:
1)Release the nut (①) on the lower hinge until the upper end of the bolt (➁).
When you release the nut(①), use enclosed hex wrench (➂) to turn NOTE the bolt(➁) a little counter clockwise to make the nut(①) loose with
your fingers.
Adjustment part 
➂WRENCH
2) Please adjust the height difference between the doors turning
the bolt (➁) turn clockwise ( 
) or counter clockwise
( 
).
When you turn clockwise ( 
), the door goes up.
NOTE
➀NUT
➁BOLT
➂WRENCH
3)After adjusting the doors, turn the nut (①) turn clockwise
( 
) until the lower end of the bolt, then tighten
the bolt again with the wrench (➂) to fix the nut(①).
➁BOLT
➂WRENCH
If you do not fix the nut (①) firmly, the bolt (➁) may be released.
NOTE
➀NUT
➁BOLT
28