Samsung VCC9150H31/BOL, VCC9150H31/XEH 2OPERATING the Cleaner, Power Control Infrared Control

2OPERATING THE CLEANER

2-1. POWER CORD

NOTE

When removing the plug from the electrical outlet, grasp the plug, not the cord.

2-2. POWER CONTROL (INFRARED CONTROL)

1)REMOTE CONTROL TYPE

-HOSE

SENDER

HANDLE CONTROL

[The cleaner is controlled by using

infrared signals.]

- BODY

OPTIONAL - DIGITAL SIGNAL

POWER ON/OFF

1.Vacuum cleaner ON/OFF ( )

Press the ON/OFF button to operate the vacu- um cleaner. Press again to stop the vacuum cleaner.

2.Vacuum cleaner (+ , -)

Press the (+) button to operate the vacuum to highsuction power. Press the (-) button to oper- ate the vacuum to low suction power.

NOTE : Don’t cover the handle sender when you use a handle control button.

Press the power ON/OFF button repeatedly to start and to stop the vacuum cleaner

(OFF → ON → OFF)

NOTE : If the remote handle control is not working, the cleaner can be operated using the ON/OFF button on the body of the machine.

RECEIVER

The IR light indicates the part that receives the infra-red signal from the handle control.

The ON/OFF button operates the vacuum cleanner or stops it.

The filter light is illuminated when the dust pack requires checking or emptying. An audio signal will also sound.

EN-3