Samsung MAXZB550RH/ELS manual Selecting a Stored Station, Improving Radio Reception

Searching for and Storing the Radio Stations (continued)

8 If you do not want to store the radio station found, revert to Step 4 and search for another station.

Otherwise:

aPress Memory.

Result: The PRGM is displayed for a few seconds.

bPress Tuning Down and Up to assign a program number between 1 and 15.

cPress Memory to store the radio station.

Result: PRGM is no longer flashed and the station is stored.

9 To store any other radio frequencies required, repeat Steps 3 to 8.

The PROGRAM function can be used to assign a new station to an existing program number.

You can also use Program/Set button on the remote control to instead Memory button in step 8.

Selecting a Stored Station

GB

You can listen to a stored radio station as follows:

1	Switch the system on by pressing Standby/On.
2	Select the TUNER function by pressing Tuner on remote control.
3	Select the required frequency band by pressing Tuner (Band) on the
	remote control or TUNER (Band) again on the front panel.
4	Press the Tuning Mode button on the front panel of the unit, or the
	Tune CD/Mode button on the remote control until “PRESET” is
	displayed.
5	Turning Multi jog on the front panel left or right until the desired
	station is found or press	/	to select the desired station.
	or

Select the desired station by pressing the station number stored,

using the Tuning or button on the remote control. Result: The desired station is now received.

	1
8	8
8

5 4 5

2,3

In Tuner mode

In manual tuning mode, you can use Multi Jog or / button to manual search a radio station.

During Tuner auto searching, press button to stop auto searching.

In Preset tuning mode, you can use Multi Jog or / button to search a stored radio station.

Improving Radio Reception

You can improve the quality of radio reception by:

Rotating the FM or AM(MW) aerial

Testing the positions of the FM and AM(MW) aerials before fixing them permanently

If reception from a specific FM radio station is poor, press Mono/ST. to switch from stereo mode to mono. The quality of the sound will be improved.

17