STEP 6 High Current Audio AC Outlet Hookup
Isolated Clean Power™ Stage 4
NOTE:
These outlets are designed to deliver maximum current to power hungry components such as power amplifiers and receivers.
You may want to program these outlets to be “switched on after delay” (see page 7, fig. 2c) to enable sequential power activation. This way, power amplifiers are turned on last and turned off first, preventing the “thump” from getting to your speakers. See “STEP 2: Outlet Programming” (page 7) for details.
A)Attach a Monster Power® ID label to each component’s power cord before you plug it into the appropriate
B)MAIN AMP: Plug the power cord of any separate amplifiers (not preamplifiers) into the PowerCenter’s corresponding MAIN AMP outlet.
C)SURROUND AMP: Plug your dedicated surround amplifier’s power cord into the corresponding SURROUND AMP outlet.
IN | CABLE TV | OUT | NORMAL |
OUTLET PROGRAMMING SWITCHES
REMOTE
UNSWITCHED SWITCHED DELAY NO DELAY
1 | IN | OUT 1 |
2 |
|
|
SATELLITE
1 | 2 | 3 | 4 | 5 |
INOUT
3
4
5
REMOTE
AC INPHONE
110V
OUT 2
GROUND |
| SHORT | LONG | DELAY TIME |
|
|
|
| (6 seconds) | (20 seconds) SWITCH |
|
| |
|
| DELAY | NO DELAY | TRIGGER OUT | DC IN |
|
|
|
|
| SWITCH |
| |
|
|
|
|
| 9~12V 300MA |
|
|
|
| DC OUT 9~12V 300MA |
|
| |
IN | ANTENNA | OUT |
|
| BREAKER 15A |
|
|
|
|
|
| PRESS TO RESET | 1800W MAX TOTAL |
12