Case 2 : Connecting to an Audio System (AV receiver with Dolby Digital or DTS decoder) - Better Quality
1.Using an optical cable, connect the DIGITAL AUDIO OUT (OPTICAL) terminal on the player to the DIGITAL AUDIO IN (OPTICAL) terminal of your AV receiver.
2.Using the video signal cable(s), connect the HDMI or A/V OUT terminal on the player to the HDMI or VIDEO IN terminal of your TV. (See pages 22~23)
3.Turn on the player, TV, and AV receiver.
4.Press the input select button of the AV receiver to select the external input and hear sound from the player. Refer to your AV receiver’s user manual to set the AV receiver’s audio input.
5.Press the input selector on your TV remote control to select the video source (HDMI or Video.)
Case 2 : Optical cable
(not included)
Case 3 : Connecting to an Audio System (Stereo Amplifier) - Good Quality
1.Using the Audio/Video cable, connect the A/ V OUT (yellow) terminal on the player to the AUDIO IN (red and white) terminals of your stereo using the red and white wires.
2.Using the video signal cable(s), connect the HDMI terminal on the player to the HDMI terminal on your TV or connect the yellow wire from the Audio/Video cable to the AV In terminal of your TV. (See pages 22~23)
3.Turn on the player, TV and Stereo Amplifier.
4.Press the input select button of the Stereo Amplifier to select the external input in order to hear sound from the player. Refer to your Stereo Amplifier’s user manual to set the Stereo Amplifier’s audio input.
5.Press the input selector on your TV remote control to select the video source (HDMI or Video.)
Case 3 : Audio/
Video cable
04 Connections
Red White
✎✎NOTE
`` If you use the Digital Audio connection described in Case 2, you will hear only front two speakers with Digital Output setting as PCM.
`` To connect to your TV using the Audio/Video cable, you may need to connect an extension cable to the yellow video wire. If you use an extension cable, the cable must have an RCA male plug on one end and an RCA female jack on the other.
English 25