Wireless Network
Your player has built in
To set the network options, see pages 39~43.
Broadband service
04 Connections
|
| Networking with PC for | Wireless IP sharer | ||
| ✎ | AllShare function |
| ||
✎ | NOTE |
| |||
| `` | To use a wireless network, your player must be connected to a wireless IP sharer (router). If the wireless IP sharer | |||
|
| `` | supports DHCP, your player can use a DHCP or static IP address to connect to the wireless network. | ||
|
| Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer | |||
|
| `` | is currently being used by another device nearby, this will result in interference and communication failure. | ||
|
| If Pure | |||
|
|
| AES (WPS2Mixed) for your AP, this player will not support a connection in compliance with new | ||
|
| `` | specifications. |
| |
|
| If your AP supports WPS | |||
|
| `` | or PIN (Personal Identification Number). WPS will automatically configure the SSID and WPA key in either mode. | ||
|
| You can setup a wireless network three ways: | |||
|
|
| Wireless (General) |
| |
|
|
| Using WPS(PBC) |
| |
|
|
| One Foot Connection |
|
Wireless (General) includes both Automatic and Manual setup procedures.
`` Wireless LAN, by its nature, may cause interference, depending on the operating conditions (AP performance, distance, obstacles, interference by other radio devices, etc).
`` Set the wireless IP sharer to Infrastructure mode.
-- WEP (OPEN/SHARED), WPA-PSK (TKIP/AES), WPA2-PSK (TKIP/AES)
`` To use the AllShare function, you must connect your PC to your network as shown in the figure. The connection can be wired or wireless.
English 27