Setup
`` Samsung Electronics shall take no legal responsibility for player malfunction caused by an unstable Internet connection or consumer negligence during a software upgrade.
`` If you want to cancel the upgrade while the upgrade software is downloading, press the ENTER button.
By USB
To upgrade by USB, follow these steps:
1.Visit www.samsung.com/bluraysupport.
2.Download the latest USB software upgrade zip archive to your computer.
3.Unzip the zip archive to your computer. You should have a single folder with the same name as the zip file.
4.Copy the folder to a USB flash drive.
5.No disc should be inserted in the product, and then insert the USB flash drive into the USB port of the player.
6.In the player’s menu, go to Settings > Support > Software Upgrade.
7.Select By USB.
✎NOTE✎
`` No disc should be inserted in the product when you upgrade the software using the USB Host jack.
`` When the software upgrade is done, check the software details in the software Upgrade menu.
`` Do not turn off the player during the software upgrade. It may cause the player to malfunction.
`` Software upgrades using the USB Host jack must be performed with a USB memory flash stick only.
By Disc
To upgrade by Disc, follow these steps:
1.Visit www.samsung.com/bluraysupport.
2.Download the latest disc software upgrade zip archive to your computer.
3.Unzip the zip archive to your computer. You should have a single folder with the same name as the zip file.
4.Write the folder onto a disc. We recommend a
5.Finalize the disc before you remove it from your computer.
6.Insert the disc into player.
7.In the player’s menu, go to Settings > Support > Software upgrade.
8.Select By Disc.
✎NOTE✎
`` When the system upgrade is done, check the software details in the software Upgrade menu.
`` Do not turn off the player during the Software Upgrade. It may cause the player malfunction.
Via Download
The Via Download option lets you upgrade using a file the player downloaded earlier but you decided not to install immediately or a file downloaded by the player in Standby Mode (See Download in Standby Mode below).
To upgrade Via Download, follow these steps:
1.If upgrade software has been downloaded, you will see the software version number to the right of Via Download.
2.Select Via Download, and then press the ENTER button.
3.The player displays a message asking if you want to upgrade. Select Yes. The player begins the upgrade.
4.When the update is complete, the player turns off automatically, and then turns on.
✎NOTE✎
`` When the system upgrade is done, check the software details in the software Upgrade menu.
`` Do not turn off the player during the software Upgrade. It may cause the player to malfunction.
Download in Standby Mode
You can set the Download in Standby Mode function so that the player downloads new upgrade software when it is in Standby mode. In Standby mode, the player is off, but its Internet connection is active. This allows the player to download upgrade software automatically, when you are not using it.
46 English