Tripp Lite SREXTENDER owner manual Frame Attachment

2 – Frame Attachment (continued)

2-5

2-6

2-7

2-8

(For 25U enclosures, skip this step.) Use four M5 x 20 mm screws and washers O to secure the frame to the rear of the rack enclosure.

Use two M6 x 12 mm screws and washers L to connect the included grounding cable N from the rack enclosure to the extension frame.

Reverse step 2-2 to attach the rear doors to the extension frame.

Attach the grounding cable of each rear door to the grounding points of the extension frame as shown. (Use the screws and washers removed in step 2-1.)

	O
	O
2-5	48/42U
	N
	L
2-6
2-7
2-8
6