Using the “CI or CI+ CARD”
To watch paid channels, the “CI or CI+ CARD” must be inserted.
-- If you don’t insert the “CI or CI+ CARD”, some channels will display the “Scrambled Signal” message.
-- Samsung TV follow up CI+ 1.3 standard. When TV product display the "Scrambled Signal", it
may happen due to CI+1.3 Version inconsistency. If you have a problem, please contact Samsung Call Centre.
-- The pairing information containing a telephone number, the “CI or CI+ CARD” ID, the Host ID, and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider.
-- When the configuration of channel information has finished, the message “Updating Completed” is displayed, indicating the channel list is updated.
NOTE
-- You must obtain a “CI or CI+ CARD” from a local cable service provider.
-- When removing the “CI or CI+ CARD”, carefully pull it out as dropping the “CI or CI+ CARD” may damage it.
-- Insert the “CI or CI+ CARD” in the direction marked on the card.
-- The location of the COMMON INTERFACE slot may differ depending on the model.
-- A “CI or CI+ CARD” is not supported in some countries and regions, therefore, check with your authorised dealer.
-- If you have any problems, please contact a service provider.
-- Insert the “CI or CI+ CARD” that supports the current aerial settings. The screen will be distorted or will not be visible.
TV Camera Connection
-- Remove the cover of the TV CAMERA port, and then connect the TV camera's USB cable to the port. You cannot cover the port with the port cover while the cable is connected to the port.
-- Make sure to connect only the TV camera to the TV CAMERA port.
