Initial setup
The initial setup dialogue box appears when the TV is first activated. Follow the on-screen instructions to finish the initial setup process, including the selecting the menu language, scanning channels, and more. During each step, either make a choice or skip the step. You can manually perform this process at a later time in the System > Setup menu.
-- If you connect any device to HDMI1 before starting the installation, the Channel Source will be changed to Set-top box automatically.
-- If you do not want to select Set-top box, please select Aerial.
Setting up a password
System > Change PIN
To alter the default setting of the TV, change the password.
Changing the TV’s password.
1.Run Change PIN and then enter the current password in the password field. The default password is “0-0-0-0”.
2.Enter a new password and then enter it again to confirm it. The password change is complete.
-- If you forgot your PIN code, press the buttons in the following sequence to reset the PIN to “0-0-0-0”:
In Standby mode: MUTE → 8 → 2 → 4 → POWER (On)