Samsung HW-N400/EN, HW-N400/XN manual Repeat, Music Skip, Anynet+ / Auto Power Link, Sound Control

Press the pbutton to pause a music file temporarily.

When you press the button again, the music file plays.

Play / Pause



Up/Down/

Left/Right

Press the indicated areas to select Up/Down/Left/Right.

Press Up/Down/Left/Right on the button to select or set functions.

•• Repeat

To use the Repeat function in “USB” mode, press the Up button.

•• Music Skip

Press the Right button to select the next music file. Press the Left button to select the previous music file.

•• Anynet+ / Auto Power Link

You can turn Anynet+ and Auto Power Link on or off.

Anynet+ and Auto Power Link are controlled by the Right and Left buttons respectively.

––Anynet+ : If the Soundbar is connected to a Samsung TV through an HDMI cable, you can control your Soundbar with a Samsung TV remote control.

Press and hold the Right button for 5 seconds to toggle Anynet+ ON and OFF.

––Auto Power Link : If the Soundbar is connected to your TV through a digital optical cable, the Soundbar can automatically turn on when you turn on your TV. Press and hold the Left button for 5 seconds to toggle Auto Power Link ON and OFF.

––Anynet+ / Auto Power Link are set to ON by default.

You can select from TREBLE, AUDIO SYNC, REAR LEVEL, or REAR SPEAKER ON/OFF.

	•• To adjust the TREBLE volume, select Sound Control TREBLE, and then use the
Sound Control	Up/Down buttons to adjust the volume within the -6 to +6 range.
	•• If the video and audio between the TV and your Soundbar are not synchronised, select
	AUDIO SYNC in Sound Settings, and then set audio delay between 0~300 milliseconds
	by using the Up/Down buttons. (Except “USB” mode)
	•• If surround speakers (not supplied) are connected, select REAR LEVEL and use the Up/
	Down buttons to adjust the volume within the -6 to +6 range.
	The REAR SPEAKER function can be turned ON/OFF by using the Up/Down buttons.
	•• AUDIO SYNC is only supported in some functions.

ENG - 14