NOTE
Make sure to secure a 41 mm (A: for both the sliding hinge and the fixed hinge) gap between the refrigerator and the closet or alcove. Then, fix the front legs using the screws.
A | A |
A
A
STEP 5 Initial settings
By completing the following steps, the refrigerator should be fully functioning.
1.Remove the PE foam sheet on each shelf corner, which is attached to protect the refrigerator during transportation.
2.Open the door, and check if the interior light lights up.
3. Remove the PE foam on the magnet from the top of the door.
4.Set the temperature to the coldest, and wait for about an hour. Then, the freezer will be slightly chilled, and the motor will run smoothly.
5.Wait until the refrigerator reaches the set temperature. Now the refrigerator is ready for use.
NOTE
When the refrigerator powers on, the alarm will sound. To turn off the alarm, press Freezer or Fridge.
English 37