Setup
Settings |
|
|
|
Speaker Setting |
|
|
|
Speaker Size |
|
| ► |
Sound Edit |
|
|
|
Delay Time |
|
|
|
Test Tone | : | Off |
|
Select |
| Return | |
Move | Select | Return | |
•For the Front, the mode is set to Small.
•For the Subwoofer, the mode is set to Present.
•For the Center and Surround, you can switch the mode to Small or None.
-Small : Select this when using the speakers.
-None : Select this when no speaker is connected.
✎NOTE
The speaker mode may vary depending on the Dolby Pro Logic and Stereo settings.
Sound Edit
You can adjust the balance and level for each speaker.
Settings
Sound Edit
| Front Bal. | dB L |
|
|
|
| R | dB |
| |||
|
|
|
|
|
| |||||||
| Surround Bal. | dB L |
|
|
|
| R | dB | ||||
|
|
|
| |||||||||
| Center Level |
|
|
|
|
|
|
|
| dB | ||
|
|
|
|
|
|
|
|
| ||||
| Surround Level |
|
|
|
|
|
|
|
| dB | ||
|
|
|
|
|
|
|
|
| ||||
| SW Level |
|
|
|
|
|
|
|
| dB | ||
|
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
| ||
|
| <Change " Select ' Return | ||||||||||
|
| mMove | " Select | ' Return | ||||||||
Press the ▲▼ buttons to select and adjust the desired speaker.
Press the ◄► buttons to adjust the settings.
Adjusting Front/Surround Bal.
You can select between 0 and
The volume decreases as you move closer to
Adjusting Center/Surround/Subwoofer Level
The volume level can be adjusted in steps from +6dB to
The sound gets louder as you move closer to +6dB and quieter as you get closer to
20 English
Delay Time
If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the Center and Surround speakers.
You can also set the Test Tone in this mode.
Setting up the Speaker Delay Time
When 5.1CH Surround Sound is played, you can enjoy the best sound if the distance between you and each speaker is the same.
Since the sounds arrive at the listening position at different times depending on the placement of speakers, you can adjust this difference by adding a delay effect to the Center and Surround Speakers.
Settings
Delay Time
Front
Center | : | 00ms |
Surround | : 10ms | |
Subwoofer |
|
|
Test Tone | : | Off |
<Change " Select ' Return
mMove " Select ' Return
Test Tone
Settings
Speaker Setting
Speaker Size
Sound Edit
Delay Time
Test Tone | : On | ► |
" Select ' Return
mMove " Select ' Return
Use the Test Tone feature to check the speaker connections.
•Press the ◄► buttons to select On.
•The test tone will be sent to Front Left ➞ Center
➞ Front Right ➞ Surround Right ➞ Surround Left ➞ Subwoofer in order.
To stop the test tone, press the ENTER button.