Samsung HT-D350/XE, HT-D350/EN manual Connecting The Speakers, Connecting the wall mount, Black

3.Connect the upper Speaker to the assembled Stand.

4.Insert another large screw (5*15, For connecting Speaker & Stand) clockwise into the hole on the rear of the speaker using a screwdriver.

5.This is the appearance after the speaker is installed. Follow this steps to install other speaker.

Connecting The Speakers

3

Speaker

Stand

5

4

02 Connections

1.Press down the terminal tab on the back of the speaker.

2. Insert the black wire into the black terminal (–) and the red wire into the red terminal (+), and then release the tab.

3.Connect the connecting plugs to the back of the product by matching the

colours of the speaker plugs to the speaker jacks. Black Red

Connecting the wall mount

1.Connect the speaker cord with the colour tube to (+), and the speaker cord without the colour tube to (–).

2.Prepare screws (not supplied) that are suitable for the hole on the back of each speaker.

See the illustrations below.

3.Fasten the screws to the wall, then hang the speaker on the wall.

Colour tube

Front left speaker (L) : White

Front right speaker (R) : Red

Center speaker : Green

Surround left speaker (L) : Blue

Surround right speaker (R) : Gray

	5 mm
	4 mm
30 mm	10 mm
	Hold on the back of the speaker

8 to 10 mm

Depth of fastened screw

English 13

HT-D350_D355-TK_ENG-1228.indd 13 2011-12-29 ￿￿ 10:58:32