Advanced Functions
USB Function
Playing Media Files using the USB Host Feature
You can enjoy media files such as pictures, movies and music saved on an MP3 player, USB memory stick or digital camera in high quality video with 5.1 channel sound by connecting the storage device to the USB port of the product.
5V 500mA
1.Connect the USB device to the USB port on the front panel of the product.
2.Press the FUNCTION button to select USB.
•USB appears on the display screen and then disappears.
3.Press the ◄► buttons to select Videos, Photo or Music.
-Select a file to play.
Safe USB Removal
To prevent damage to the memory stored in the USB device, perform safe removal before disconnecting the USB cable.
•Press the YELLOW(C) button.
- REMOVE will appear on the display.
•Remove the USB cable.
✎NOTE
To listen to your music files with 5.1 channel sound, you must set the Dolby Pro Logic II mode to Matrix. (See page 28)
Remove the USB cable from the USB port slowly. Otherwise, it may cause damage to the USB port.
USB Recording
While playing
1.Connect the USB device to your product.
2.Insert the
3.Press the USB REC button on the
remote control.
• To start ripping the current track, press the USB REC button on the remote control while the system is playing a track or stopped temporarily.
• To record the entire CD, press and hold the USB REC button on the remote control.
- "FULL CD RIPPING" appears on the display and recording starts.
4. Press the STOP () button to stop recording.
• When USB recording of a CD is completed, you will find a new folder named “RECORDING” in the USB drive. The contents will be saved in the folder in the MP3 format.
✎NOTE
Do not disconnect the USB connection or the power cable during the USB Recording. Otherwise, it may cause damage to the data. To stop USB Recording, press the STOP button and disconnect the USB device after the system stops playing the CD completely.
If you disconnect the USB connection during the USB Recording, the system will turn off and you will not be able to delete the recorded file.
If you connect the USB device to the system while it is playing a CD, the system stops temporarily and will play again.
DTS-CDs cannot be recorded.
If the recording duration is less than 5 seconds, a recording file may not be created.
USB Recording works only if the USB device is formatted in the FAT file system. (The NTFS file system is not supported.)
The audio signal will not be output during USB recording of the CD.
When HDMI AUDIO is set to On, the USB Recording function is not supported.
05 Advanced Functions