Configuring Eye Saver Mode, Brightness and Contrast from the Initial Screen
Adjust the Brightness, Contrast and Eye Saver Mode by moving the JOG button.
Contrast
| Eye Saver Mode | Off |
|
| Brightness |
|
|
|
|
|
|
――The displayed image may differ depending on the model.
Eye Saver Mode
――Not available when PIP/PBP Mode is set to On.
Brightness
――This menu is not available when MAGICSAMSUNGBright is set to Dynamic Contrast mode. ――This menu is not available when Eco Saving Plus is enabled.
――This menu is not available when Eye Saver Mode is enabled.
Contrast
――This menu is not available when MAGICSAMSUNGBright is in Cinema or Dynamic Contrast mode. ――This menu is not available when Game Mode is enabled.
――This menu is not available when PIP/PBP Mode is set to On and the Size is set to 
(PBP Mode).
Changing the Volume setting
You can adjust Volume by moving the JOG button left or right, if no OSD menu is displayed.
Volume | 50 |
Mute
――The displayed image may differ depending on the model.
――If the audio quality of a connected input device is poor, the Auto Mute function on the product may mute the sound or cause choppy audio when applying the headphones or speakers. Set the input volume for the input device to at least 20% and control the volume using the volume control (JOG button LEFT/RIGHT) on the product.
――What is Auto Mute?
The function mutes the audio to improve sound effect when there is sound noise or when the input signal is weak, usually due to a problem with the volume of an input device.
――To activate the Mute function, access the Volume control screen, then use the JOG button to move the focus down. To deactivate the Mute function, access the Volume control screen, then increase or decrease the Volume.
14