Removing the Stand
――Before removing the stand from the monitor, place the monitor on a flat and stable surface with the screen facing down. ――The exterior may differ depending on the product.
1 | 2 | 3 | 4 |
Place the protective Styrofoam (cushion) included in the package on the floor and place the product facing down on the Styrofoam, as shown in the image.
If Styrofoam is unavailable, use a thick sitting mat.
-Caution
Do not press down on the monitor. There is a risk of damaging the monitor.
To disassemble the stand from the monitor, be sure to press the lower part of the monitor with one hand, and shake the stand from side to side with the other hand to make some gap between them.
Press the lower part of the monitor with one hand, and pull the stand with the other hand in the direction of the arrow as shown in the figure.
Remove the stand neck from the stand base by pulling it in the direction of the arrow as shown in the figure.
20