Samsung LU32J590UQUXEN, LU32J590UQIXCI manual Set the Picture Size for each of the divided screens

PBP Mode (available in PBP mode(Size ))

Set the Picture Size for each of the divided screens.

In PC mode

•• Auto: Display the picture according to the aspect ratio of the each screen input source.

•• Wide: Display the picture in full screen regardless of the aspect ratio of the each screen input source.

In AV mode

•• 4:3: Display the picture of the sub-screen with an aspect ratio of 4:3. Suitable for videos and standard broadcasts.

•• 16:9: Display the picture of the sub-screen with an aspect ratio of 16:9.

•• Screen Fit: Display the picture of the sub-screen with the original aspect ratio without cutting anything off.

――The function may not be supported depending on the ports provided with the product. ――Changing the screen size is available when the following conditions are satisfied.

――A digital output device is connected using the HDMI/DP cable.

――The input signal is 480p, 576p, 720p, or1080p and monitor can display normally (Not every model can support all of these signals.).

――This can only be set when the external input is connected through HDMI/DP and PC/AV Mode is set to AV.

Contrast

PIP Mode (available in PIP mode(Size / / ))

Adjust the contrast level for sub-screen.

PBP Mode (available in PBP mode(Size ))

Adjust the contrast level for each screen.

32