Fisher-Price T4256 specs

Important!

•Fully charge the camera and parent unit (each with a battery pack installed) for four hours before ﬁrst-time use.

•For proper setup and use, please read these instructions.

•Please keep this instruction sheet for future reference, as it contains important information.

•Camera operates on AC current (use enclosed docking station) or 6V NiMH rechargeable battery pack (included). Parent unit operates on AC current (use enclosed AC adaptor/charger) or 3.6V NiMH rechargeable battery pack (included).

•Adult assembly is required to install the wall mount. Tools needed for assembly: electric drill, ¼" drill bit, hammer and Phillips screwdriver (tools not included).

•This product is not intended to be used as a medical monitor and its use should not replace adult supervision.

•Test sound/video reception of parent unit before ﬁ rst-time use and whenever you change location of the camera.

•Adults Note: Periodically examine this product for damage to the cord, housing or other parts that may result in the risk of ﬁ re, electric shock or injury. If the product is damaged, do not use it.

•Never use extension cords with the AC adaptor/charger or docking station power cord.

•Never use camera or parent unit near water (i.e. bathtub, sink, wet basement, etc.).

•Always use the camera and parent unit where there is adequate ventilation. To prevent overheating, keep away from heat sources such as radiators, heat registers, direct sunlight, ﬁ re, stoves, ampliﬁ ers, ﬁ re, excessive heat or other appliances that produce heat.

•Fisher-Price®does not recommend the use of two monitors in one house.

•Always remember that you are using public airwaves when using your monitor. Conversations, even from rooms near the camera, may broadcast to other nursery monitors, radios, cordless telephones or scanners outside your home. To protect the privacy of your home, always turn off the camera when not in use.

•Do not connect to more than the recommended number of power supplies.

•The AC adaptor/charger and docking station are not toys.

•Disconnect the AC adaptor/charger from the parent unit and the docking station power cord from the wall outlet before cleaning.

•If this product begins to operate erratically, you may need to reset the electronics. Press the camera power button OFF and press again to turn back ON; press the parent unit power button OFF and press again to turn power back ON.

•Carrier Frequency: 2.4 Ghz

•Product features and decoration may vary from photographs.