Fisher-Price T4256 manual Low battery icon

Problems & Solutions

Problem		Solution
Parent unit beeps and displays		If the low battery icon with a 1 is displayed, the battery pack in
low battery icon	on screen	parent unit is weak or dead. Use AC adaptor/charger to charge
		the battery and use as a power source.
		If low battery icon with a 2 is displayed, the battery pack in
		camera is weak or dead. Place the camera in the docking
		station to charge the battery and use as a power source.
Camera power L.E.D.		Camera power is off. Turn camera power on.
does not light
		Loose power cord connection and camera power is off. Check
		docking station power cord plug-to-outlet connection.
		No power to wall outlet and camera power is off. Make sure
		light switch that controls power flow to wall outlet is on.
		Power is off because circuit breaker for baby’s room is off.
		Make sure house fuses and circuit breakers are on.
You can hear conversations or		There is signal interference due to other nursery monitors on
sounds from other homes		same channel or cordless telephone use. You may need to pair
		the parent unit and camera. Remove the parent unit battery
		door and press the pairing button with a paperclip. The power
		button will blink when the pairing button is released. Then, turn
		over the camera and press the pairing button with a paperclip.
		The power button will flash on both units after the pairing
		button is pressed. When the pair is complete, the power button
		on both units will go back to solid.

Hint: If, after checking all of these solutions, you believe that your camera power cord or AC adaptor are damaged, please contact Fisher-Price®.

34