Crimestopper Security Products SP-100 operating instructions Brown Wire + Siren Output 3 Amp Max

Page 5

WIRING

ORANGE WIRE: (-) NEGATIVE ARMED OUTPUT / STARTER DISABLE (500mA Ground, Optional)

This wire becomes a (-) Ground Output when the System is Armed. This output is used for disabling the starter or to activate optional devices such as extra sensors, LED’s, window roll-up modules, voice modules etc. For Starter Kill, cut starter wire and connect between 87A and 30 on relay. Connect orange wire to 85 and connect 86 to an Ignition source that has voltage in the ON and CRANKING position. (See wiring diagram for relay configuration page 16)

BROWN WIRE: (+) SIREN OUTPUT (3 Amp Max.)

Connect to RED siren wire from the Siren in the engine compartment.

WHITE WIRE: Two 12V FLASHING LIGHT OUTPUTS (7.5 Amp x 2)

Connect to the switched parking light wire at back of light switch. If this is not possible, connect directly to one of the parking lights at the front of the vehicle. Some vehicles require separate right and left circuits. Use the one White wire for each circuit (Use separate 7.5Amp fuse for each circuit).

RED WIRE: 12V POWER INPUT (15 amp fuse)

Connect to 12 Volt source with supplied fuse & holder. Recommended location for this connection is at the vehicle battery positive terminal.

2 PIN PLUG (WHITE): VALET PROGRAM and OVERRIDE PUSH-BUTTON

2 PIN PLUG (RED): ALARM STATUS LED INDICATOR

4 PIN SENSOR PLUG (RED):

SHOCK SENSOR: The sensor supplied with

GREEN Wire: Negative Trigger.

this system does not require any additional

WHITE Wire: Negative Warn-A-Way.

wiring. Simply mount the sensor in a suitable

BLACK Wire: Sensor Ground.

location, plug it in, and adjust the sensitivity.

RED Wire: Sensor 12V Power.

 

SENSOR ADJUSTMENT

Clockwise = Higher Sensitivity

Counter Clockwise = Lower Sensitivity

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents REV. B SP-100Installation Cautions & Warnings Table of ContentsComponent Mounting Control Module MountingWiring White Wire Two 12V Flashing Light Outputs 7.5 Amp x Brown Wire + Siren Output 3 Amp MaxRED Wire 12V Power Input 15 amp fuse PIN Plug RED Alarm Status LED Indicator PIN Sensor Plug REDAdding Aftermarket Door Lock Motors Power Door Lock WiringRemote Transmitter Programming Option # Option ProgrammingButton SilentPassive Arming Horn Chirps PulsesIgnition Controlled Locks 60 Sec. Door Open WarningDouble Unlock Pulse Carjack FeaturesDisarm with Trunk POP Door LOCK/UNLOCK Pulse TimeOperating Instructions Alarm Trigger Reset Alarm TriggeringCAR Finder Mode Silent CAR Finder ModeEmergency Override & Disarm PRE-WARNING Shock Protection & Sensor AdjustmentPrior Intrusion Alert Open Zone Alert & BypassActive Carjack Carjack ProtectionPassive Carjack FULL-TIME CarjackPIN Sensor PLUG/HARNESS RED LED / Valet Switch MountingWiring Shock Sensor Wiring Diagram SP-100

SP-100 specifications

The Crimestopper Security Products SP-100 is an innovative and advanced security solution designed to protect vehicles and enhance the safety of their owners. This top-tier product is equipped with a variety of cutting-edge features, technologies, and characteristics that set it apart from conventional vehicle alarm systems.

One of the standout features of the SP-100 is its powerful two-way communication system. This technology allows users to receive real-time notifications about their vehicle's status, giving them peace of mind whether they are at home or on the go. The key fob provides both audible and visual alerts, ensuring that any potential threat is immediately brought to the owner's attention.

The SP-100 boasts an impressive range of up to 1,500 feet, making it effective in various environments. This enables the user to have greater control and awareness over their vehicle, even from a distance. This extended range is especially beneficial for those parking in crowded areas or multi-story garages where a clear line of sight may not be available.

In terms of features, the Crimestopper SP-100 also includes a remote start function, allowing for the convenience of starting the vehicle from afar. This is particularly useful in extreme weather conditions, as it enables the driver to warm up or cool down the vehicle before entering. Additionally, the remote start feature comes with a safety mechanism that ensures the vehicle remains secure during operation.

The system is also equipped with a range of sensors that detect unauthorized entry attempts, such as shock, tilt, and door sensors. These sensors activate the alarm to deter thieves and notify the owner of any suspicious activity. The adjustable sensitivity feature allows users to customize the response based on their preferences and the environment, reducing the risk of false alarms.

Another notable characteristic of the SP-100 is its easy installation process. Designed for compatibility with a variety of vehicle types, this system includes detailed instructions and all necessary components for a straightforward setup. The user-friendly interface ensures that even those with minimal technical knowledge can install and operate the system effectively.

Overall, the Crimestopper Security Products SP-100 combines advanced technology, user convenience, and reliable security features to provide an exceptional vehicle protection solution. Its innovative design and array of functionalities make it a preferred choice for those seeking to enhance their vehicle security system. Whether for personal use or commercial fleets, the SP-100 positions itself as a leader in vehicle security products, prioritizing safety and peace of mind.
Top Page Image Contents