Crimestopper Security Products SP-100 Horn Chirps Pulses, Passive Arming, Active RE-ARMING

Page 9

OPTION PROGRAMMING

NOTE: Options can be instantly restored to Factory Default Values. To restore default values:

Perform step #1 above, then press button 3. The siren and horn will chirp 4 times and lights will flash 4 times. Turn OFF Ignition. All programming options will be restored to * Default * values,

See Programming Chart.

1. HORN CHIRPS PULSES

This option controls the system’s Horn-honk output. There are 3 selections: Button 1 (Lock) = Horn Pulse only when alarm is tripped. Button 2 (Unlock) = Horn Chirps for Arm / Disarm and Pulse when tripped. Button 3 (Silent X) = Horn Chirps for Arm, Disarm, and Pre-warning protection. The horn output pulses when triggered.

2. PASSIVE ARMING

This option controls the Passive (Automatic) Arming feature. If ON, arming will occur 40 Seconds after the ignition is turned off and the last door has been closed. The LED will begin flashing rapidly while counting down. If a door is reopened, the system will wait for the door or zone to close before arming. The unit will flash the lights once. Doors will lock if passive locking is selected. Factory default setting is ON. Note: If you

Disarm System and Re-Enter the vehicle, you must turn Ignition Key ON and OFF for Passive Arming to reactivate.

3. IGNITION CONTROLLED LOCKS

This option controls whether the locks are controlled by Ignition. There are 3 selections: Button 1 (Lock) = Lock/Unlock with vehicle Ignition. Button 2 (Unlock) = No Ignition locks. Button 3 = Ignition Lock only.

4. 5/60 Sec. DOOR OPEN WARNING

This setting changes the delay time in which the alarm system begins to monitor the Door circuit. This option can prevent the alarm from giving warning chirps on vehicles with a delayed dome light.

5. ACTIVE RE-ARMING

Active Re-arming allows the system to re-arm itself 40 seconds after disarmed with the transmitter if a door has not been opened. This is handy if the vehicle is accidentally disarmed (via the Transmitter in your pocket) without you knowing it.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents REV. B SP-100Installation Cautions & Warnings Table of ContentsComponent Mounting Control Module MountingWiring White Wire Two 12V Flashing Light Outputs 7.5 Amp x Brown Wire + Siren Output 3 Amp MaxRED Wire 12V Power Input 15 amp fuse PIN Plug RED Alarm Status LED Indicator PIN Sensor Plug REDAdding Aftermarket Door Lock Motors Power Door Lock WiringRemote Transmitter Programming Option # Option ProgrammingButton SilentPassive Arming Horn Chirps PulsesIgnition Controlled Locks 60 Sec. Door Open WarningDouble Unlock Pulse Carjack FeaturesDisarm with Trunk POP Door LOCK/UNLOCK Pulse TimeOperating Instructions Alarm Trigger Reset Alarm TriggeringCAR Finder Mode Silent CAR Finder ModeEmergency Override & Disarm PRE-WARNING Shock Protection & Sensor AdjustmentPrior Intrusion Alert Open Zone Alert & BypassActive Carjack Carjack ProtectionPassive Carjack FULL-TIME CarjackLED / Valet Switch Mounting Wiring Shock SensorPIN Sensor PLUG/HARNESS RED Wiring Diagram SP-100

SP-100 specifications

The Crimestopper Security Products SP-100 is an innovative and advanced security solution designed to protect vehicles and enhance the safety of their owners. This top-tier product is equipped with a variety of cutting-edge features, technologies, and characteristics that set it apart from conventional vehicle alarm systems.

One of the standout features of the SP-100 is its powerful two-way communication system. This technology allows users to receive real-time notifications about their vehicle's status, giving them peace of mind whether they are at home or on the go. The key fob provides both audible and visual alerts, ensuring that any potential threat is immediately brought to the owner's attention.

The SP-100 boasts an impressive range of up to 1,500 feet, making it effective in various environments. This enables the user to have greater control and awareness over their vehicle, even from a distance. This extended range is especially beneficial for those parking in crowded areas or multi-story garages where a clear line of sight may not be available.

In terms of features, the Crimestopper SP-100 also includes a remote start function, allowing for the convenience of starting the vehicle from afar. This is particularly useful in extreme weather conditions, as it enables the driver to warm up or cool down the vehicle before entering. Additionally, the remote start feature comes with a safety mechanism that ensures the vehicle remains secure during operation.

The system is also equipped with a range of sensors that detect unauthorized entry attempts, such as shock, tilt, and door sensors. These sensors activate the alarm to deter thieves and notify the owner of any suspicious activity. The adjustable sensitivity feature allows users to customize the response based on their preferences and the environment, reducing the risk of false alarms.

Another notable characteristic of the SP-100 is its easy installation process. Designed for compatibility with a variety of vehicle types, this system includes detailed instructions and all necessary components for a straightforward setup. The user-friendly interface ensures that even those with minimal technical knowledge can install and operate the system effectively.

Overall, the Crimestopper Security Products SP-100 combines advanced technology, user convenience, and reliable security features to provide an exceptional vehicle protection solution. Its innovative design and array of functionalities make it a preferred choice for those seeking to enhance their vehicle security system. Whether for personal use or commercial fleets, the SP-100 positions itself as a leader in vehicle security products, prioritizing safety and peace of mind.
Top Page Image Contents