Appendix

Troubleshooting

Problem

Possible Solution

 

Check if you pressed POWER on the remote control unit.

 

(See page 23.) If the indicator on the TV is still red,

No power

press POWER on the TV.

 

Is the AC cord disconnected? (See page 10.)

 

Has the power been turned on? (See page 23.)

 

External influences such as lightning, static electricity, may

Unit cannot be

cause improper operation. In this case, operate the unit after

operated.

first turning off the power of the TV or unplugging the AC cord

 

and re-plugging it after 1 or 2 minutes.

 

Are batteries inserted with polarity (e, f) aligned?

 

(See page 13.)

Remote control unit

Are batteries worn out? (Replace with new batteries.)

does not operate.

Are you using it under strong or fluorescent lighting?

 

Is a fluorescent light illuminated near the remote control

 

sensor?

 

 

Picture is cut off/with

Are screen mode adjustments such as picture size made

sidebar screen.

correctly? (See page 28.)

 

 

Strange color,

Adjust the picture tone. (See page 32.)

light color, or color

Is the room too bright? The picture may look dark in a room

misalignment

that is too bright.

 

 

Power is suddenly

Is the sleep timer set? (See page 25.)

The unit’s internal temperature has increased. Remove any

turned off.

objects blocking vent.

 

 

Is connection to other components correct? (See page 17.)

No picture

Is the correct input selected? (See page 25.)

 

Is picture adjustment correct? (See page 28.)

No sound

Is the volume too low? (See page 25.)

Have you pressed MUTE on the remote control unit?

 

(See page 25.)

The TV sometimes

This is not a malfunction. This happens when the cabinet

makes a cracking

slightly expands and contracts according to change in

sound.

temperature. This does not affect the TV’s performance.

Cautions regarding use in high and low temperature environments

When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.

Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a heater, as this may cause the cabinet to deform and the Liquid Crystal panel to malfunction.

Storage temperature: -4°F to +140°F (-20°C to +60°C)

44

Page 46
Image 46
Sharp LC-46SV49U, LC-32SV29U, LC-26SV490U operation manual Appendix, Troubleshooting, Problem Possible Solution