Sharp LC-46SV49U Watching TV, Turning On/Off the Power, Initial Setup, Language setting

Watching TV

Turning On/Off the Power

Press POWER on the TV, or POWER on the remote control unit to turn the power on.

• POWER indicator : Power on,nothing;Power off,red.

Press POWER on the TV, or POWER on the remote control unit again to turn the power off.

• The TV enters standby and the image on the screen disappears.

POWER

INPUT

1 2 3

POWER

•If you are not going to use this TV for a long period of time, be sure to remove the AC cord from the AC outlet.

•Small amount of electric power is still consumed even when the TV is turned off.

•there is If no signal input for 5 minutes, the power will turn to standby mode automatically.

Initial Setup

When you turn on the TV for the first time, the Initial Setup will guide you through the setup process. Perform the following steps before you press POWER on the remote control unit.

1.Insert the batteries into the remote control unit. (See page 13.)

2.Connect the antenna cable to the TV. (See page 12.)

3.Plug in the AC cord to the AC outlet. (See page 10.)

1.Initial Setup

•The Initial Setup screen display at the first use. Press ENTER to start the initial setup.

Initial Setup Welcome

Thank you for your purchase of our

SHARP Liquid Crystal Television.

Please press [ENTER] to start the wizard.

TV USB PC MENU

ENTER

EXITRETURN

2.Language setting

•Select the OSD menu language from English, Spanish, or French.

•Press ▲ / ▼ to select the desired language listed on the screen, and then press the ► button to the next step.

Initial Setup	Language
Please select your Language:
	English
	Españpl
	Français

Back Select Next

Return Exit

23