Crimestopper Security Products TN-4003, TN-4004 Confirming Proper Operation

Page 7

INSTALLATION

Within five minutes the flash rate will change to approximately one second on and one second off to indicate that the GPS Receiver has established a location “lock”. Within 1 minute the flash color should be green to indicate good cellular coverage. If you do not get the results above, refer to page 13, Section 13 – Troubleshooting

Confirming Proper Operation

The Test wire (see wiring diagram) on the TRAKNET is for testing the internal functionality of the hardware. Running tests with this wire grounded will not send data to the call center. The user account does not need to be activated to run the tests. Grounding the wire will start test mode function. If the wire is not removed from ground the unit will remain in the test mode for 5 minutes and then return to normal operation. To start the tests again you must ground the test wire again. If you want the TRAKNET to function normally after testing, remove the test wire from ground and tape the end to prevent the device from going into test mode during normal operation.

Remember that the TRAKNET will remain in the test mode for only 5 minutes at a time and you will need to cycle the test wire to re-enter the test mode. The TRAKNET interface circuits are all pre-wired in the cable harness. Table 1 also shows the wire colors associated with the input and output circuits. The digital outputs are provided to switch optional external devices. Each can sink 1 amp at 35 volts. The outputs are voltage protected so they can sink current from inductive loads. If the individual sink current is allowed to exceed 1 amp, the outputs could be damaged. The digital inputs are triggered by a contact closure or short of less than 100 ohms from the contact to ground on their inputs.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Installation Instructions Table of Contents Control Module & Component Mounting Installation Cautions & WarningsModule Mounting Location Mounting LocationSelecting the Antenna Locations Locating Vehicle Power InstallationConfirming Proper Operation Solid LED Color LED Status IndicatorWiring Pin 17 Gray Not Used Pin 18 White/Brown Output Pin 13 Empty Pin 14 Red 12 Volts InputPin15 Black Chassis Ground Input Pin 16 Black Ground InputWiring Diagram Step #1 Access InformationStep #2

TN-4003, TN-4004 specifications

Crimestopper Security Products has established a formidable reputation in the field of vehicle security systems, and their TN-4003 and TN-4004 models are perfect examples of this commitment to innovative technology and high-quality performance. These systems are designed to enhance the security of your vehicle, offering peace of mind and protection against theft and vandalism.

The TN-4003 is a technologically advanced vehicle security system that features a two-way remote control, providing users with real-time feedback on their vehicle's status. It allows you to arm and disarm your security system from a distance, and the LCD screen on the remote displays critical information, such as if the alarm has been triggered. This feature provides an added layer of security, enabling quick responses in critical situations. The system includes a built-in shock sensor that detects any unauthorized entry or impact, instantly alerting the owner with a loud siren. Additionally, it is equipped with a range of adjustable sensitivity settings, allowing users to configure the system according to their environment.

Similarly, the TN-4004 offers enhanced capabilities with its 1-way remote system and similar features to its counterpart. It includes an array of advanced technologies such as automatic rearming, ensuring that your vehicle remains protected even if you forget to activate the system after entry. This model also features a dual-zone shock sensor, which distinguishes between light and heavy impacts, providing tailored responses based on the severity of the incident.

Both models boast easy installation processes, making them appealing to both professional installers and DIY enthusiasts. With a compact design, they can seamlessly integrate into various vehicle types without compromising aesthetics. The systems also come with a comprehensive installation guide to simplify the process further.

Built with durability in mind, both the TN-4003 and TN-4004 are constructed using high-quality materials to withstand environmental challenges, ensuring longevity and reliability. They are designed to operate in a wide range of temperatures, making them suitable for various climates.

In summary, Crimestopper's TN-4003 and TN-4004 models represent cutting-edge vehicle security solutions, offering robust protection features like shock sensors, two-way communication, and adjustable settings. Their user-friendly installation process and durable design make them ideal choices for drivers seeking peace of mind in safeguarding their vehicles.
Top Page Image Contents