Installation

Locating Vehicle Power

The TRAKNET has an internal power management program that monitors the vehicle power at all times. The internal power management program is continuously looking at the condition of the vehicle battery in order to detect the state of the vehicle operation. The TRAKNET determines the state of the vehicle power by detecting changes in the battery voltage over time. It is critical in this installation that the vehicle power be taken from a source as close to the battery as possible.

Possible sources besides the direct connection to the battery are the main fuse block panel or the point where the vehicle charging circuits are connected to the 12-volt system. a Connect the red lead or fuse end of the power cable to the +12 volt vehicle power. The power cable can be shortened if needed but be sure to also install the in line fuse. Connect the black lead to the vehicle chassis (ground). If you need to shorten the power cable or reconnect the in-line fuse, the wires can be removed and reattached by unscrewing the ends of the fuse holder and inserting the new wire. The holder accepts a 1/ 4-inch striped stranded wire. Tighten the fuse holder ends by securely tightening by hand.

*Improper connection could result in numerous “Start up test” notifications, and increased usage on monthly billing.

Powering the Unit for the First Time

*Disconnect the backup battery if it is installed. Connect the two coax cables from the combo antenna (securely) and connect the vehicle’s 12-volt power and observe the LED on the Module. During the initial 15 minutes after +12 volts is connected to the Module, the LED should flash green at the rate of 1 second “on”, 5 seconds “off”, this feature is designed for installation test purposes (15 minute Start-Up).

TN-4003, TN-4004 specifications

Crimestopper Security Products has established a formidable reputation in the field of vehicle security systems, and their TN-4003 and TN-4004 models are perfect examples of this commitment to innovative technology and high-quality performance. These systems are designed to enhance the security of your vehicle, offering peace of mind and protection against theft and vandalism.

The TN-4003 is a technologically advanced vehicle security system that features a two-way remote control, providing users with real-time feedback on their vehicle's status. It allows you to arm and disarm your security system from a distance, and the LCD screen on the remote displays critical information, such as if the alarm has been triggered. This feature provides an added layer of security, enabling quick responses in critical situations. The system includes a built-in shock sensor that detects any unauthorized entry or impact, instantly alerting the owner with a loud siren. Additionally, it is equipped with a range of adjustable sensitivity settings, allowing users to configure the system according to their environment.

Similarly, the TN-4004 offers enhanced capabilities with its 1-way remote system and similar features to its counterpart. It includes an array of advanced technologies such as automatic rearming, ensuring that your vehicle remains protected even if you forget to activate the system after entry. This model also features a dual-zone shock sensor, which distinguishes between light and heavy impacts, providing tailored responses based on the severity of the incident.

Both models boast easy installation processes, making them appealing to both professional installers and DIY enthusiasts. With a compact design, they can seamlessly integrate into various vehicle types without compromising aesthetics. The systems also come with a comprehensive installation guide to simplify the process further.

Built with durability in mind, both the TN-4003 and TN-4004 are constructed using high-quality materials to withstand environmental challenges, ensuring longevity and reliability. They are designed to operate in a wide range of temperatures, making them suitable for various climates.

In summary, Crimestopper's TN-4003 and TN-4004 models represent cutting-edge vehicle security solutions, offering robust protection features like shock sensors, two-way communication, and adjustable settings. Their user-friendly installation process and durable design make them ideal choices for drivers seeking peace of mind in safeguarding their vehicles.