Crimestopper Security Products CS-2002DC Programmable Option Reset, Custom Personal Override Code

Page 13

PROGRAMMABLE OPTION RESET

Follow the steps below to reset ALL OPTION VALUES ON PAGE 10 TO FACTORY DEFAULT SETTINGS.

1.Turn the Ignition ON and press the Override/Program button 5 times. You should hear a long chirp.

2.Immediately press Button #3 (Trunk) on the remote.

3.The siren will chirp 4 times and lights will flash 4 times.

4.Turn off ignition and all programming options should be restored to * values. (See page 10)

CUSTOM PERSONAL OVERRIDE CODE

Custom override allows the user to set a specific number of button presses (2-15) required to perform an emergency override/disarm of the alarm system. This increases the level of security of the system, but you MUST MEMORIZE how many button presses you have changed your system to use or the unit will not disarm in an emergency.

1.Enter programming mode. (See step #1 on page 10)

2.Press program button three times to go to option #3 “Passive Locks/Custom Override”.

3.Press the Button #3 (TRUNK) on the remote transmitter.

4.Press and release the program again the number of times you desire in order to perform emergency disarm on this alarm system. Press the program button 2-15 times only. You need to wait for the siren to chirp the same number of times you pressed the program button to confirm.

To test feature: Trip the alarm system, turn key ON, press the program/valet button 2-15 times as programmed above then continue to HOLD DOWN valet button on the LAST PRESS for 5 seconds. Alarm should disarm. If system does not disarm, then disarm with the remote transmitter and try again. If system still does not disarm or you have forgotten your custom code, then you must use your remote control to disarm the system

CAUTIONARY NOTE!

If you set up this feature and forget your special code, there is no way to disarm the system other than the remote control.

TO CANCEL CUSTOM OVERRIDE CODE follow the Programmable Option Reset steps in the above section.

13

Image 13
Contents CS-2002DC Series Installation Cautions & Warnings Table of ContentsGreen Wire Negative Door Trigger WiringViolet Wire + Positive Door Trigger Control Module & Component MountingYellow Wire Ignition Switched on and Start +12 Volts Black Wire System Chassis GroundBlue Wire Negative HOOD/TRUNK Trigger Optional CS-2002DC IV Module PIN Plug Blue PROGRAM/OVERRIDE Push Button Power Door Lock WiringPIN Sensor PLUG/HARNESS Blue Positive Trigger Doorlock Wiring Negative Trigger Door Locks Separate DRIVER’S Door Unlock WiringTransmitter Programming Option Programming = Default SettingPassive Arming / Chirp Countdown Horn Chirps / PulsesIGNITION-CONTROLLED Locks Door Open Warning 10 or 60 SecondsDouble Unlock Pulse Carjack FeaturesSilent Arming /DISARMING Chirp Defeat Parking Lights on with DisarmCustom Personal Override Code Programmable Option ResetOperating Instructions Alarm TriggeringActive Arming DisarmingSelective Silent ARM/DISARM Through Remote Control PRE-WARNING Shock Protection & Sensor AdjustmentProgrammable Silent ARM/DISARM Mode Chirp Defeat TRUNK/HATCH POP Remote AUX. Output 1, OptionalPrior Intrusion Alert Valet ModeDome Light Illumination Optional Open Zone ALERT/BYPASSActive RE-ARMING FAIL-SAFE Protection Carjack Protection FeaturesARM/DISARM with Ignition on Program Option #15 Active CarjackFULL-TIME Carjack LED / Valet POD Operation & MountingLED / Valet Button POD LED / Valet Button POD Mounting Under Dash+ Positive Door Green Online Technical Support

CS-2002DC specifications

Crimestopper Security Products CS-2002DC is a state-of-the-art vehicle security system designed to enhance the safety and protection of your vehicle. Known for its advanced features and user-friendly interface, the CS-2002DC has gained popularity among car owners looking for reliable security options.

One of the most significant features of the CS-2002DC is its dual-zone impact sensor. This technology detects different levels of impact, allowing the system to distinguish between minor incidents, like a bump, and more severe threats such as attempted break-ins. In addition, the integration of a starter kill feature provides an extra layer of security. This function disables the ignition system, making it nearly impossible for a thief to start your vehicle.

The CS-2002DC also incorporates a remote keyless entry system, enabling users to unlock or lock their vehicle from a distance. This feature is particularly convenient for those who often find themselves with their hands full. The remote transmitter is ergonomically designed and features multiple buttons, allowing for quick access to different functionalities.

Another noteworthy characteristic of the CS-2002DC is its programmable features, which allow users to customize settings based on their preferences. Users can adjust siren tones, sensitivity levels of the impact sensor, and other features to suit their lifestyle and needs.

This security system is equipped with a visual LED indicator that provides a visual confirmation of the system's status. It informs users when the alarm is armed, disarmed, or triggered, enhancing user awareness and peace of mind.

The installation process of the CS-2002DC is streamlined, thanks to the included wiring harness and detailed instructions. This makes it easier for both professional installers and DIY enthusiasts to set up the system without significant hassle.

In addition to these primary features, the CS-2002DC is designed with durability in mind, ensuring it can withstand various environmental conditions. Its robust design and quality components contribute to the overall longevity and reliability of the product, making it a sound investment for vehicle security.

In summary, the Crimestopper Security Products CS-2002DC is a comprehensive vehicle security system that combines advanced technology and user-friendly features, making it an excellent choice for vehicle protection. Its dual-zone impact sensor, starter kill, remote keyless entry, and programmable functions deliver the peace of mind car owners seek in today's world.