Wiring

CONTROL MODULE & COMPONENT MOUNTING

DO NOT Mount the control unit in the engine compartment or where the control unit or wiring harness where they can become entangled with moving parts such as brake/gas/clutch pedals, or the steering column! The alarm control module should be mounted in a concealed location. The Placement of the module will affect the distance from which the remote transmitter can control the unit. The antenna wire should be routed away from any metal if possible. Do not alter the length of the antenna wire or route it with other wires. Do not ground the antenna wire. Fasten the module to a bracket or wire harness using the cable ties provided. Under dash Mounting: If you are locating the control unit underdash, mount it as high as possible, not easily located by an intruder. Driver’s Side Under dash mounting provides an easy location for wiring most of the system’s connections, however this is a common location for an intruder to check for an alarm after breaking into the vehicle.

SIREN: Mount the siren under the hood to an inner fender-well, wheel-well, or other body surface with the open end facing downward. Run the red siren wire through the firewall using a rubber grommet. Ground the black to the body metal near the siren or you can use one of the siren’s mounting screws for a ground.

LED: Mount the red LED in a visible location on the dashboard or console.

Shock Sensor: Mount the included shock sensor with wire ties to an under dash wire harness or fasten with screws to firewall or side paneling. Use the adjustment screw to set the sensitivity of the sensor. One screw adjusts both

Valet/Programming Button: Mount the Valet/Override/Program push-button in a hidden but accessible location. It is REQUIRED for emergency disarm, programming features and entering valet mode.

GREEN WIRE: (-) NEGATIVE DOOR TRIGGER

Identify the wire that reads ground when any door is open and 12 volts when all doors are closed. Some vehicles may have isolated door triggers. In this case you may need to run additional wires from other doors or go directly to the wire that triggers the vehicle’s interior dome light. Sometimes newer vehicles contain a separate body control module (BCM) where the door trigger circuit can be located. One vehicle will not require the use of BOTH door trigger wires.

VIOLET WIRE: (+) POSITIVE DOOR TRIGGER

Same as the GREEN wire above except this wire is used for vehicles that show a positive voltage (12 volts) when the door is open and a ground when doors are closed as in many Ford, Lincoln, and Mercury vehicles.

CS-2002DC specifications

Crimestopper Security Products CS-2002DC is a state-of-the-art vehicle security system designed to enhance the safety and protection of your vehicle. Known for its advanced features and user-friendly interface, the CS-2002DC has gained popularity among car owners looking for reliable security options.

One of the most significant features of the CS-2002DC is its dual-zone impact sensor. This technology detects different levels of impact, allowing the system to distinguish between minor incidents, like a bump, and more severe threats such as attempted break-ins. In addition, the integration of a starter kill feature provides an extra layer of security. This function disables the ignition system, making it nearly impossible for a thief to start your vehicle.

The CS-2002DC also incorporates a remote keyless entry system, enabling users to unlock or lock their vehicle from a distance. This feature is particularly convenient for those who often find themselves with their hands full. The remote transmitter is ergonomically designed and features multiple buttons, allowing for quick access to different functionalities.

Another noteworthy characteristic of the CS-2002DC is its programmable features, which allow users to customize settings based on their preferences. Users can adjust siren tones, sensitivity levels of the impact sensor, and other features to suit their lifestyle and needs.

This security system is equipped with a visual LED indicator that provides a visual confirmation of the system's status. It informs users when the alarm is armed, disarmed, or triggered, enhancing user awareness and peace of mind.

The installation process of the CS-2002DC is streamlined, thanks to the included wiring harness and detailed instructions. This makes it easier for both professional installers and DIY enthusiasts to set up the system without significant hassle.

In addition to these primary features, the CS-2002DC is designed with durability in mind, ensuring it can withstand various environmental conditions. Its robust design and quality components contribute to the overall longevity and reliability of the product, making it a sound investment for vehicle security.

In summary, the Crimestopper Security Products CS-2002DC is a comprehensive vehicle security system that combines advanced technology and user-friendly features, making it an excellent choice for vehicle protection. Its dual-zone impact sensor, starter kill, remote keyless entry, and programmable functions deliver the peace of mind car owners seek in today's world.