Crimestopper Security Products CS-2004 WDC Transmitter Programming, JUMPER P8 NOT USED

JUMPER PLUG PROGRAMMING

JUMPER P8: NOT USED

This jumper is not used for any alarm options.

JUMPER P9: REMOTE CARJACK FEATURE

This jumper controls whether the anti-Carjack functions of the unit can be activated through the remote control’s Button #2 (Unlock). Carjack protection will activate via the remote under these 3 conditions: Jumper P9 is open (removed), Ignition is in the ON position (or driving car), and the number #2 (Unlock) button on the remote is pressed AND HELD for 2 seconds.

TRANSMITTER PROGRAMMING

1.Turn Ignition ON, press and hold the program / override button for about 5 seconds until you hear 5 siren chirp and the parking lights come on solid.

2.Push any transmitter and the unit will flash the lights 2-4 times (2nd transmitter code flashes 2X and third code flashes 3X'’ etc.).

3.The is a 10 second program window in which all present transmitter codes must be programmed. Any transmitters not present or learned in step 2 above will be dropped form the unit’s memory.

4.Turn off Ignition.

IGN

OFF	PRESS AND
TURN IGN. ON	HOLD BUTTON
	(5 SEC.)

5 CHIRPS

LIGHTS ON

AUX SLNT

CRIMESTOPPER

IGN

OFF

LIGHTS FLASH 2X FOR 2nd CODE

TURN IGN. OFF

( " " 3X FOR 3rd CODE)

PRESS ANY BUTTON	( " " 4X FOR 4th CODE)
ON REMOTE OR WATCH