Crimestopper Security Products CS-2004 WDC Operation, Unlock, Disarm, Silent, Lock, Aux

OPERATION

4 BUTTON REMOTE TRANSMITTER: SECURWATCH® TRANSMITTER:

#1			#2
LOCK/			UNLOCK/
ARM			DISARM
	AUX	SLNT
#3	CRIM ESTOPPER		#4
AUX. 1			SILENT/
			AUX. 2

ACTIVE ARMING

To arm the alarm and lock the doors, press the #1 Button on either transmitter. You will hear a single siren chirp and the lights will flash once. The system will arm, the doors will lock (optional) and the starter will be disabled. The red in-dash LED in the vehicle will begin to flash. After a short delay of 10-15 seconds to allow vehicle and electronics to stabilize the system will be completely armed.

ALARM TRIGGERING

If there is an intrusion into the vehicle such as an open door/hood/trunk, the alarm siren will sound and flash the lights for 1 minute. This is known as a cycle. After the cycle, the system will automatically reset and continue to protect the vehicle. If a door is left open then the unit will cycle for the Maximum of 5 minutes, reset, and continue to protect the other un-tampered zones.

DISARMING

BUTTON 1

BUTTON 2

BUTTON 1 + 2 = BUTTON 4

(NO BUTTON 3 WITH WATCH)

To disarm the alarm and unlock the doors, press the #2 Button on either transmitter. You will hear 2 siren chirps and the lights will flash twice. The in-dash LED stops flashing dome light turns on. (Optional) If the alarm is tripped, then the #2 Button will have to be pressed twice. The first press will reset the trigger and the second press will Disarm.