Crimestopper Security Products CS-9704 manual Installation Cautions & Warnings

Page 2

INSTALLATION CAUTIONS & WARNINGS

1.BEFORE BEGINNING, check all vehicle manufacturer cautions and warnings regarding electrical service (AIR

BAGS, ABS BRAKES, AND BATTERY).

2.TO PREVENT A POSSIBLE DEAD BATTERY remove vehicle dome light fuse while working on the vehicle.

MAKE CERTAIN TO REINSTALL FUSE PRIOR TO TESTING FOR DOOR TRIGGERS.

3.DO NOT EXCEED MAXIMUM OUTPUT RATINGS - SERIOUS DAMAGE MAY OCCUR. Limits for alarm and remote start functions are listed in the main diagram and wiring descriptions page. If you are unsure about current load, measure the load with an AMP-METER.

4.REMOVE MAIN SYSTEM FUSE(S) before jump starting the vehicle. DAMAGE MAY OCCUR TO SYSTEM IF PROPER PRECAUTIONS ARE NOT OBSERVED.

5.DO NOT INSTALL CS9704RS ALARM/AUTOSTARTER in vehicles with MANUAL TRANSMISSIONS. Accidentally left in gear, a remote started vehicle could become a self-propelled threat to life and property.

6.DO NOT EXTEND CS-9704RS AUTOSTARTER IGNITION HARNESS LENGTH. When mounting module, be certain to place module so that main harness reaches all ignition switch wiring. Extending these wires could result in poor performance.

7.DO NOT ROUTE ANY WIRING THAT MAY BECOME ENTANGLED with brake, and gas pedals, steering column, or any other moving parts in the vehicle.

8.WHEN STARTING THE VEHICLE IN A GARAGE, make sure that door is open or adequate ventilation is provided.

SUGGESTED COMPONENT MOUNTING

Control Module: Driver’s side underdash, the unit should be placed as high as possible, not easily accessible.

Shock Sensor: Mount with wire ties to an under dash wire harness or fasten with screws to a panel.

Siren: under the hood to fender-well or other body surface with the open end facing downward. LED in a visible location on the dashboard or console. Drill an 11/32" hole at the chosen location.

Override/Program button: hidden location, but accessible to the user in case the system must be disarmed without the use of the transmitter. This switch is also used to program certain features.

Antenna Assembly: inside front left windshield (close to window frame) using supplied double sided tape.

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents CS-9704RS IntroductionSuggested Component Mounting Installation Cautions & WarningsBAGS, ABS BRAKES, and Battery Brown WiringRED YellowWiring PIN Plug White Green PIN Plug Blue PIN Plug RED PROGRAM/OVERRIDE ButtonPIN Plug RED GRN/BLK PIN BlueDisarming ARM / Lock Disarm / Unlock Trunk POP Remote Start PanicArming Remote Engine Start Trunk POP / Optional FeaturePanic Feature AUTOLOCK/UNLOCKActive RE-ARMING Alarm Programming OptionsAlarm Programming Options Silent ARM/DISARM Programming OverrideActive RE-ARM Programming TACH/TACHLESS ModeVacuum Mode Remote Start Programming OptionsTransmitter Programming TroubleshootingGAS / Diesel Extended Range Antenna Starter does not Engage When ArmedUnit Shuts Down 4-5 Seconds After Remote Starting Siren Chirps DisappearCS-9704RS

CS-9704 specifications

The Crimestopper Security Products CS-9704 is an advanced vehicle security system designed to provide vehicle owners with peace of mind and enhanced protection against theft. Featuring state-of-the-art technology and a user-friendly interface, the CS-9704 is a popular choice among car enthusiasts and individuals seeking to safeguard their vehicles.

One of the standout features of the CS-9704 is its two-way communication system. This technology allows the user to receive real-time updates about the status of their vehicle via a handheld remote. This remote features a vibrant LCD display that communicates essential information such as alarm status, battery life, and vehicle location. Additionally, the remote can confirm commands sent to the vehicle, ensuring the owner is always in control.

The CS-9704 also integrates advanced security technologies, including a shock sensor and a dual-zone perimeter sensor. The shock sensor detects vibrations or impacts to the vehicle, triggering the alarm and providing immediate alerts to the owner. The dual-zone perimeter sensor offers added protection by detecting unauthorized entry attempts, such as door openings or window breaking, providing a layered approach to security.

Another notable characteristic of the CS-9704 is its built-in remote start capability. This feature allows users to start their vehicle from a distance, ensuring a comfortable environment inside the car before even stepping in. Additionally, the remote start system is equipped with safety features that prevent the engine from being started if a door is open or if the vehicle is not in park, ensuring user safety and vehicle integrity.

The Crimestopper CS-9704 also comes with a range of customization options, allowing users to tailor the security settings to fit their specific needs. With programmable features such as adjustable sensitivity levels for the sensors, users can find the perfect balance between security and convenience without trigger false alarms.

Furthermore, the system is designed for easy installation and is compatible with most vehicles. Its compact design means it can be discreetly integrated into a variety of car models without compromising aesthetics. The reliability and durability of the components ensure that the system will maintain its effectiveness over time.

In summary, the Crimestopper Security Products CS-9704 is an exceptional vehicle security system that combines innovative technology, user-friendly features, and customizable options to deliver comprehensive protection for vehicle owners. Its two-way communication, advanced sensor technology, and convenient remote start capabilities make it a top choice in automotive security solutions.
Top Page Image Contents