Crimestopper Security Products CS-9704 PIN Plug Blue PIN Plug RED PROGRAM/OVERRIDE Button, White

Page 5

WIRING

J-3

2 PIN PLUG (WHITE)

RED-BLACK WIRE: PIN 1: DOME LIGHT ILLUMINATION (-) (REQUIRES RELAY)

Connect to terminal 85 of relay. This wire turns the dome light on for 30 seconds upon disarming of the alarm. If the ignition is turned on or the alarm is re-armed, the dome light will turn off again.

WHITE-YELLOW:PIN 2: HORN HONK OUTPUT (-) (MAY REQUIRE RELAY)

This wire provides a pulsed 150mA negative output for honking the vehicle's horn when the alarm is triggered. Connect this wire to the horn relay in the steering column. If there is no horn relay you must install one.

NOTE: Some vehicle horns operate only with ignition on. This will require rewiring the horn circuit in order for the alarm system to operate the horns. Call technical support for details.

J-4

 

2 PIN PLUG (BLUE)

 

J-5

2 PIN PLUG (RED)

PROGRAM/OVERRIDE BUTTON

 

 

LED INDICATOR (Red flashing light)

 

J-6

 

3 PIN PLUG (RED)

 

 

 

 

 

GRN/BLK PIN 1:

NEGATIVE REMOTE OUTPUT (Optional)

 

 

 

RED

PIN 2:

FACTORY DISARM (Negative pulse)

 

 

 

YELLOW

PIN 3:

VACUUM INPUT (Used when installing a vacuum switch for engine monitor)

J-7

 

3 PIN PLUG (WHITE)

 

 

 

 

 

GREEN

PIN 1:

NEGATIVE LOCK

Connect directly to negative lock/unlock systems. If vehicle

uses

RED

PIN 2:

+12V For Relays

positive door lock signals or reversing polarity type, then external

BLUE

PIN 3:

NEGATIVE UNLOCK

relays must be added. Door lock wires are usually found in

J-8

 

4 PIN SENSOR PLUG (22 GAUGE WIRES)

 

 

 

WHITE

PIN 1:

NEG. PRE-WARN

The Dual Stage Pre-

Warn Shock sensor connects directly to

BLACK

PIN 2:

SENSOR GROUND

Alarm Brain with 4-Pin harness. Note: If adding additional

BLUE

PIN 3:

NEG. TRIGGER

sensors, you must diode-isolate the extra sensor’s trigger

RED

PIN 4:

SENSOR +12V

wire. Place a diode in-line with band (cathode) towards the

 

 

 

 

sensor.

 

 

 

OPERATION

5

Image 5
Contents Introduction CS-9704RSSuggested Component Mounting Installation Cautions & WarningsBAGS, ABS BRAKES, and Battery RED WiringBrown YellowWiring PIN Plug RED GRN/BLK PIN PIN Plug Blue PIN Plug RED PROGRAM/OVERRIDE ButtonPIN Plug White Green BlueDisarming ARM / Lock Disarm / Unlock Trunk POP Remote Start PanicArming Panic Feature Trunk POP / Optional FeatureRemote Engine Start AUTOLOCK/UNLOCKAlarm Programming Options Silent ARM/DISARM Programming Alarm Programming OptionsActive RE-ARMING OverrideVacuum Mode TACH/TACHLESS ModeActive RE-ARM Programming Remote Start Programming OptionsTransmitter Programming TroubleshootingGAS / Diesel Unit Shuts Down 4-5 Seconds After Remote Starting Starter does not Engage When ArmedExtended Range Antenna Siren Chirps DisappearCS-9704RS

CS-9704 specifications

The Crimestopper Security Products CS-9704 is an advanced vehicle security system designed to provide vehicle owners with peace of mind and enhanced protection against theft. Featuring state-of-the-art technology and a user-friendly interface, the CS-9704 is a popular choice among car enthusiasts and individuals seeking to safeguard their vehicles.

One of the standout features of the CS-9704 is its two-way communication system. This technology allows the user to receive real-time updates about the status of their vehicle via a handheld remote. This remote features a vibrant LCD display that communicates essential information such as alarm status, battery life, and vehicle location. Additionally, the remote can confirm commands sent to the vehicle, ensuring the owner is always in control.

The CS-9704 also integrates advanced security technologies, including a shock sensor and a dual-zone perimeter sensor. The shock sensor detects vibrations or impacts to the vehicle, triggering the alarm and providing immediate alerts to the owner. The dual-zone perimeter sensor offers added protection by detecting unauthorized entry attempts, such as door openings or window breaking, providing a layered approach to security.

Another notable characteristic of the CS-9704 is its built-in remote start capability. This feature allows users to start their vehicle from a distance, ensuring a comfortable environment inside the car before even stepping in. Additionally, the remote start system is equipped with safety features that prevent the engine from being started if a door is open or if the vehicle is not in park, ensuring user safety and vehicle integrity.

The Crimestopper CS-9704 also comes with a range of customization options, allowing users to tailor the security settings to fit their specific needs. With programmable features such as adjustable sensitivity levels for the sensors, users can find the perfect balance between security and convenience without trigger false alarms.

Furthermore, the system is designed for easy installation and is compatible with most vehicles. Its compact design means it can be discreetly integrated into a variety of car models without compromising aesthetics. The reliability and durability of the components ensure that the system will maintain its effectiveness over time.

In summary, the Crimestopper Security Products CS-9704 is an exceptional vehicle security system that combines innovative technology, user-friendly features, and customizable options to deliver comprehensive protection for vehicle owners. Its two-way communication, advanced sensor technology, and convenient remote start capabilities make it a top choice in automotive security solutions.