Wiring

GRAY WIRE: PIN 6: Engine Monitor (used for tach mode only)

Used to monitor when the engine is running. Connect to negative terminal of ignition coil, crankshaft position sensor or ECM/PCM tach wire. An alternate method is to wrap several turns around a spark plug wire and fasten with wire ties or hi-temp plastic clamps. See programming selection for engine monitor type on page 10 under “Remote Start Programming Options”.

GREEN WIRE: PIN 7: DOOR TRIGGER (for negative [grounding] switch)

Identify the wire that reads ground when any door is open and 12 volts when all doors are closed. Connect this to the green door trigger wire to allow the alarm to trigger when any door is open. Some vehicles use a diode to isolate driver door. In this case you need to run an additional wire from the other doors to this trigger wire to allow triggering from any door.

BLUE WIRE: PIN 8: HOOD/TRUNK TRIGGER (Grounding switch type / Mandatory Connection!)

This wire is an input trigger for a grounding hood or trunk pin switch. It is used to trigger the alarm and also to inhibit remote start if the hood is open. Connect to existing hood and trunk pin switches, which read ground when open. Diode isolate existing switches to avoid any feedback to, or from vehicle's electrical system. If no existing switches are available, install new pin switches (it may be necessary to drill a hole) and connect to BLUE wire of alarm. Note: DO NOT mount new pin switches in water pathways.

PURPLE WIRE: PIN 9: DOOR TRIGGER (positive type switch)

Same as green wire above except this wire is used for vehicles that show a positive voltage (12 volts) when the door is open such as Ford.

YELLOW WIRE: PIN 10: BRAKE INPUT (for positive switch)

Connect this wire to the foot brake switch wire that goes to 12 volts when the foot brake is depressed. This input is used to reset remote start after entering the running vehicle and turning the ignition key on.

CS-9704 specifications

The Crimestopper Security Products CS-9704 is an advanced vehicle security system designed to provide vehicle owners with peace of mind and enhanced protection against theft. Featuring state-of-the-art technology and a user-friendly interface, the CS-9704 is a popular choice among car enthusiasts and individuals seeking to safeguard their vehicles.

One of the standout features of the CS-9704 is its two-way communication system. This technology allows the user to receive real-time updates about the status of their vehicle via a handheld remote. This remote features a vibrant LCD display that communicates essential information such as alarm status, battery life, and vehicle location. Additionally, the remote can confirm commands sent to the vehicle, ensuring the owner is always in control.

The CS-9704 also integrates advanced security technologies, including a shock sensor and a dual-zone perimeter sensor. The shock sensor detects vibrations or impacts to the vehicle, triggering the alarm and providing immediate alerts to the owner. The dual-zone perimeter sensor offers added protection by detecting unauthorized entry attempts, such as door openings or window breaking, providing a layered approach to security.

Another notable characteristic of the CS-9704 is its built-in remote start capability. This feature allows users to start their vehicle from a distance, ensuring a comfortable environment inside the car before even stepping in. Additionally, the remote start system is equipped with safety features that prevent the engine from being started if a door is open or if the vehicle is not in park, ensuring user safety and vehicle integrity.

The Crimestopper CS-9704 also comes with a range of customization options, allowing users to tailor the security settings to fit their specific needs. With programmable features such as adjustable sensitivity levels for the sensors, users can find the perfect balance between security and convenience without trigger false alarms.

Furthermore, the system is designed for easy installation and is compatible with most vehicles. Its compact design means it can be discreetly integrated into a variety of car models without compromising aesthetics. The reliability and durability of the components ensure that the system will maintain its effectiveness over time.

In summary, the Crimestopper Security Products CS-9704 is an exceptional vehicle security system that combines innovative technology, user-friendly features, and customizable options to deliver comprehensive protection for vehicle owners. Its two-way communication, advanced sensor technology, and convenient remote start capabilities make it a top choice in automotive security solutions.