Mount Installation

JHS SERIES

Installation Instructions

INSTALLATION

IMPORTANT ! : The following installation instructions assume that a 1-1/2" NPT pipe has been properly installed and is in place.

1.Thread mount (A) onto 1-1/2" NPT pipe until hand tight.

2.Adjust mount (A) position until Centris cup is facing the desired position of the display. (See Figure 1)

1-1/2" NPT Pipe

Centris Cup

(A)

Figure 1

3.When mount (A) is properly positioned secure mount (A) to

1-1/2" NPT pipe by installing and tightening 5/16-18 x 3/8" set screw (B) using 3/16" hex wrench. (See Figure 2)

NOTE: If mount is being used to couple two pipes, use both set screws when securing mount (A) to pipes.

	(B) x 1
	(A)
	(B) x 1
2	2
(A)

Figure 2

Display Installation

1.Determine mounting pattern on display.

WARNING: IMPROPER INSTALLATION CAN LEAD TO EQUIPMENT FALLING CAUSING SERIOUS PERSONAL INJURY AND DAMAGE TO EQUIPMENT! DO NOT substitute hardware. Use only hardware supplied by manufacturer!

WARNING: IMPROPER INSTALLATION CAN LEAD TO ELECTRIC SHOCK OR DAMAGE TO EQUIPMENT! Screw length must not exceed the depth of threaded mounting insert in display.

WARNING: OVERTIGHTENING OF SCREWS CAN DAMAGE PARTS AND LEAD TO SERIOUS PERSONAL INJURY AND DAMAGE TO EQUIPMENT! DO NOT over tighten screws when installing interface bracket.

NOTE: If the display being installed has a 100x100 VESA mounting pattern, no interface bracket is required and the display can be mounted directly to the Centris cup as outlined below.

NOTE: If the display being installed requires an interface bracket, refer to the interface bracket installation instructions.

WARNING: IMPROPER INSTALLATION CAN LEAD TO DISPLAY FALLING CAUSING SERIOUS PERSONAL INJURY OR DAMAGE TO EQUIPMENT! Using screws of improper size may damage your display! Proper screws will easily and completely thread into display mounting holes. Ensure that screws are not too long.

WARNING: IMPROPER INSTALLATION CAN LEAD TO DISPLAY FALLING CAUSING SERIOUS PERSONAL INJURY OR DAMAGE TO EQUIPMENT! Inadequate thread engagement in display may cause display to fall! Back out screws ONLY as necessary to allow installation of Centris cup!

1.Start two M4 x 8mm Phillips pan head screws (included in hardware kit) into upper mounting holes in display back. (See Figure 3)

NOTE: Leave at least 1/8" of each screw protruding out back of display.

JHS Series specifications

The Chief Manufacturing JHS Series represents a significant advancement in the realm of mounting solutions for flat panel displays, specifically designed for retail, corporate, and educational environments. This series showcases a blend of innovative technology and practical functionality, making it an essential choice for anyone looking to optimize their display setups.

One of the standout features of the JHS Series is its extensive range of motion. The mounts offer flexible positioning options, allowing users to tilt, swivel, and extend displays to achieve the desired viewing angles. This adaptability enhances the overall user experience, making it easier to accommodate various room layouts and viewing preferences.

The JHS Series is built with robust, high-quality materials designed to support a wide range of display sizes. With models that can accommodate screens from small to large, this series is versatile enough to meet the demands of any space, be it a conference room, classroom, or retail environment. Its sturdy construction ensures longevity and dependability, even in high-traffic areas.

Another notable feature of the JHS Series is its streamlined installation process. Each mount is engineered for quick and easy setup, complete with detailed instructions and all necessary hardware. This efficiency saves time and effort, allowing users to focus on integrating their displays rather than struggling with complicated assembly.

The JHS Series also incorporates intelligent cable management systems. These systems help to keep wires organized and out of sight, reducing clutter and promoting a clean, professional look. This is particularly beneficial in environments where aesthetics are important, such as retail displays or executive offices.

Moreover, the JHS Series is compatible with a variety of display technologies, including LED and LCD panels. This compatibility ensures that users can take advantage of the latest display advancements without worrying about mount limitations.

In terms of safety, the JHS Series is designed with secure locking mechanisms to prevent displays from accidental falls or disengagement. This feature is crucial in any public or high-usage area, providing peace of mind for users and facility managers alike.

Overall, the Chief Manufacturing JHS Series stands out for its superior design, functionality, and adaptability. Its combination of robust construction, ease of installation, and thoughtful features makes it a top choice for anyone looking to enhance their display solutions. Whether for commercial use or educational purposes, this series meets the diverse requirements of modern display technologies.