Attaching Display to Stand

MF1, MF2, PF1, PF2 Series

Installation Instructions

WARNING: EXCEEDING MAXIMUM WEIGHT CAPACITY MAY LEAD TO SERIOUS PERSONAL INJURY OR DAMAGE TO EQUIPMENT! It is the installer’s responsibility to ensure the total amount of weight placed on the stand does not exceed 125 lbs (56.70 kg) for the MF1, 250 lbs (113.40 kg) for the MF2 [125 lbs (56.70 kg) per faceplate]; 200 lbs (90.72 kg) for the PF1, 400 lbs (181.44 kg) for the PF2 [200 lbs (90.72 kg) per faceplate].

CAUTION: Before attaching display(s) to the stand ensure the stand is on level surface.

CAUTION: ALWAYS remove the display(s) BEFORE adjusting the height of the stand.

1.Adjust the stand to the desired height by holding the top part of the post, pulling out knob on the center post and turning 90o in either direction to disengage the locking mechanism. (See Figure 9)

Figure 9

2.Raise or lower the center post, then turn the knob 90o either direction to engage the knob and lock the stand at desired height. (See Figure 9)

IMPORTANT ! : Set the height of the stand so the display does NOT rest on the lower part of the post. (See Figure 9) Always set the height so the knob is engaged in a hole in the center post.

3.Attach PSBU or MSBU interface bracket(s) to the display(s) following the instructions included with the bracket.

4.While supporting both sides of display, align four mounting buttons on display or interface bracket with four mounting holes in head assembly. (See Figures 10 and 11)

Figure 10

WARNING: EACH DISPLAY MAY WEIGH IN EXCESS OF 40 LBS! Always use two people and proper lifting techniques when installing or positioning display on stand.

5.Lower display into place listening for audible "click" to ensure recessed area of mounting buttons are properly seated in lower area of mounting holes.

(See Figures 10 and 11)

WARNING: IMPROPER INSTALLATION CAN LEAD TO STAND OR DISPLAY FALLING CAUSING SERIOUS PERSONAL INJURY OR DAMAGE TO EQUIPMENT! Ensure mounting buttons are completely engaged in mounting holes.

NOTE: Holes are provided in the faceplate for use with a padlock or similar locking device, if desired. In addition, the pin and nut may be removed from the upper holes and moved to the lower holes for use as a more permanent locking device. (See Figure 11)

	Remove pin	4
	and nut and	4
	and nut and
	move to lower holes

A padlock or bolt may be placed through latch holes

Figure 11

MF1 Series, MF2 Series, PF1 Series, PF2 Series specifications

Chief Manufacturing has established itself as a leader in the design and manufacture of mounting solutions, particularly within the audiovisual sector. Among their well-regarded products are the PF1, MF2, MF1, and PF2 series, each crafted to cater to specific installation needs while maintaining high standards in technology and usability.

The PF1 Series is a standout in fixed mount technology, offering a low-profile design that seamlessly integrates televisions into various environments. Key features include a quick-release mechanism that allows for effortless attachment and detachment, which is particularly beneficial in commercial applications. It supports a weight capacity of up to 175 pounds and is compatible with VESA mounting patterns, ensuring versatility across many TV models. Additionally, its built-in security features help prevent theft, making it an ideal choice for public spaces.

On the other hand, the MF2 Series represents the pinnacle of full-motion mounting solutions. This series provides exceptional flexibility, enabling users to tilt, swivel, and extend their displays. The MF2 mounts can accommodate screen sizes ranging from 37 to 70 inches and are designed to support weights up to 125 pounds. With integrated cable management systems, users can maintain a clean and organized appearance while enhancing the viewing experience by easily adjusting the display’s position.

The MF1 Series is characterized by its durability and innovative design aimed at enhancing user experience through quick installation. This series is engineered with adjustable mounting points, facilitating compatibility with a wide range of TV sets. The MF1 supports various viewing angles through tilting and swiveling features, ensuring an optimized sightline. Its robust construction makes it a reliable choice for residential and professional environments alike.

Finally, the PF2 Series builds on the strengths of the PF1 Series while introducing enhanced features aimed at professional settings. It supports larger displays, with a weight capacity of up to 300 pounds, making it suitable for large-format televisions. Key attributes include integrated leveling adjustments, allowing for precise installation, and an easy-to-use installation guide that accelerates setup. The PF2’s sleek design ensures a polished look, which is essential in corporate environments where aesthetics matter.

Overall, the Chief Manufacturing PF1, MF2, MF1, and PF2 series exemplify innovation and quality in mounting solutions, ensuring both functionality and style across various applications.