Samsung WW80H7400EW/EE, WW90H7400EW/EE manual Position the drain hose, Turn on the washing machine

Aqua hose (applicable models only)

The aqua hose alerts users of a risk of water leaks. It senses the water flow and turns red on the centre indicator (A) in case of a leak.

A

STEP 5 - Position the drain hose
The drain hose can be positioned in three ways:
Over the edge of a wash basin
The drain hose must be placed at a height of between 60 cm and 90
cm (*) from the floor. To keep the spout of the drain hose bent, use the
supplied plastic hose guide (A). Secure the guide to the wall using a
hook to ensure stable drainage.	A

ln a sink drain pipe

The drain pipe must be above the sink siphon so that the end of the hose is at least 60 cm above the floor.

ln a drain pipe

The drain pipe should be between 60 cm and 90 cm high (*). It is advisable to use a 65 cm high vertical pipe. Make sure the drain hose is connected to the stand pipe at a slant.

Drain standpipe requirements:

•Minimum diameter of 5 cm

•Minimum carry-away capacity of 60 litres per minute

STEP 6 - Turn on the washing machine

TPlug the power cord into a wall socket featuring an AC 220-240V / 50Hz approved electrical outlet protected by a fuse or circuit breaker. Then, press the Power button to turn on the washing machine.

English - 17

02 INSTALLLATION

WW90H7600EW-03403K-07_EN.indd 17

2016/2/5 15:54:19