Samsung LT32E310EX/XE manual Initial Setup, Using the TV’s Controller Panel Key, Standby mode

Getting Started

Using the TV’s Controller (Panel Key)

The TV's Controller, a small joy stick like button on the rear left side of the TV, lets you control the TV without the remote control.

✎✎Some functions which require a PIN code may not be available. ✎✎The product colour and shape may vary depending on the model. ✎✎Exits the menu when pressing the controller more than 1 second.

✎✎When using the controller in the up/down/left/right directions, make sure you do not push the controller in first. If you push the controller in first it will not move in the up/down/left right directions.

Selecting the Media Play

Selecting the Menu m R Selecting a Source

P

Return

Power off

Function menu

Remote control sensor TV Controller

Standby mode

Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.

Initial Setup

When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the POWERP button. Setup is available only when the source is set to TV.

✎✎If you connect any device to HDMI IN 1(STB) before starting the installation, Channel Source will be changed to automatically. If you do not want to select Set-top box, please select Aerial.

If You Want to Reset This Feature...

Select System - Setup (Initial Setup). Enter your 4 digit PIN number. The default password is "0-0-0-0". If you want to change the PIN number, use the Change PIN function.

You should do Setup (MENU → System) again at home even though you did in shop already.

✎✎If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets the PIN to “0-0-0-0”: MENU → 8 → 2 → 4 → POWER (on)

English - 13