troubleshooting
PROBLEM | SOLUTION | |
|
| |
Motor dows not start. | • Check cable, pulg and socket. | |
• Leave to cool. | ||
| ||
|
| |
Suction force is gradually | • Check for blockage and remove. | |
decreasing. | ||
| ||
|
| |
Cord does not rewind fully. | • Pull the cord out | |
rewind button. | ||
| ||
|
| |
Vacuum cleaner dows not pick | • Check hose and replace if required. | |
up dirt. | ||
| ||
|
| |
| • Please check filter and, if required, clean as | |
Low or decreasing suction | illustrated in the instructions. if filters are out of | |
| condition change them to new ones. | |
Body overheating | • Please check filters, If required clean as | |
illustrated in the instruction. | ||
| ||
|
| |
Static electicity discharge | • Please decrease power suction. | |
|
|
04troubleshooting
This Vacuum cleaner is approved the following. EMC Directive : 2004/108/EEC
Low Voltage Directive : 2006/95/EC
troubleshooting _15