Samsung CTN264EA01/XEE manual Safety shutoff, Residual heat indicator

Page 19

Safety shutoff

If one of the cooking zones is not switched off or the heat setting is not adjusted after an extended period of time, that particular cooking zone will automatically switch itself off.

Any residual warmth will be indicated with (for “hot”) in the digital displays corresponding to the particular cooking zones.

The cooking zones switch themselves off at the following times.

Heat setting

Switch off

 

 

1-2

After 6 hours

 

 

3

After 5 hours

 

 

4-5

After 4 hours

 

 

6-9

After 1.5 hours

 

 

If the Hob is overheated because of abnormal operation, will be displayed. And the Hob will be switched off.

If cookware is unsuitable or too small or no cookware has been placed on the

cooking zone, will be displayed. And after 1 minute the corresponding cooking zone will be switched off.

Should one or more of the cooking zones switch off before the indicated time has elapsed, see the section “Troubleshooting”.

Other reasons why a cooking zone will switch itself off

All cooking zones will immediately switch themselves off if liquid boils over and lands on the control panel.

The automatic shutoff will also be activated if you place a damp cloth on the control panel. In both of these instances, the appliance will need to be switched

on again using the main On/Off control sensor after the liquid or the cloth has been removed .

Residual heat indicator

When an individual cooking zone or the hob is turned off, the presence of residual heat is

shown with an (for “hot”) in the digital display of the appropriate cooking zones. Even after the cooking zone has been switched off, the residual heat indicator goes out only after the cooking zone has cooled.

You can use the residual heat for thawing or keeping food warm.

es ur feat rpandts

WARNING

As long as the residual heat indicator is illuminated, there is a risk of burns.

If the power supply is interrupted, the symbol will go out and information about WARNING residual heat will no longer be available. However, it may still be possible to burn

yourself. This can be avoided by always taking care when near the hob.

parts and features _19

CTN264EA01_XEE_-00322A_EN.indd 19

8/2/2010 9:50:42 AM

Image 19
Contents Induction Hob Important safety symbols and precautions Using this manualNso ctiru yinst fet sa Safety instructionsSafety instructions Safety instructions Safety instructions Safety instructions Failure to do so may result in electric shock Safety instructions Disposal instructions Contents Safety instructions for the installer Installing the hobRegulations and compliance Terminals Connecting to the mains power supplyInstalling into the countertop 100 Cooking zones Parts and features Control panel Components Induction hob Installation brackets ScrewsInduction heating Key features of your appliance Residual heat indicator Safety shutoffOther reasons why a cooking zone will switch itself off Initial cleaning Temperature detectionBefore you begin Size of pans Hob useCookware for induction cooking zones Suitability testRight Wrong Using suitable cookwareUsing the touch control sensors Energy saving tipsSelect cooking zone and heat setting Switching the appliance onSwitching the appliance off Corresponding cooking zones in the form of an for hot Switching a cooking zone offUsing the child safety lock Switching the child safety lock on / offPower Management Power boost controlExample Switch Setting Cookingmethod Examples for Use Suggested settings for cooking specific foodsStubborn Soiling Cleaning and careHob Light SoilingHob frame option Problem DirtTo avoid damaging your appliance Icervse yand antwarr Warranty and serviceFAQs and troubleshooting Check for the following possibilityIs it a technical fault? ServiceWarranty period Technical data Technical dataCooking rings Code No. DG68-00322A
Related manuals
Manual 32 pages 22.82 Kb Manual 32 pages 19.04 Kb Manual 32 pages 43.86 Kb Manual 32 pages 30.47 Kb