Oreck XL2070RHSM Hook bottom of bag collar, Opening under lip B, Lip a of connector, Installed

Page 5

All paper dust bags are not the same. Your ORECK disposable dust bags have been designed to be used with the ORECK cleaner. Using bags other than genuine ORECK disposable bags will affect the cleaning ability of your cleaner and could cause damage to it.

The Belt

The belt on your vacuum cleaner controls the speed of the revolving brush and is very important for the effective operation of the cleaner. If the belt becomes stretched or cut, it will cause the revolving brush to stop completely or slow down. See instructions in the manual for replacing belt.

An extra belt is stored in the baseplate of your cleaner. When buying replacement belts, use ONLY ORECK genuine belts. Belts other than ORECK belts will not operate the revolving brush correctly and may create undue stress which will cause damage to the motor and brush bearings. Using belts other than ORECK belts will void the warranty.

Lubrication

The vacuum cleaner motor bearings are factory lubricated and sealed. Further lubrication is not required.

General Cleaner Care

At least once a month, check for and remove excessive lint, string or hair

from the revolving brush.

Wipe the outside of the cleaner with

a damp cloth. Also, clean the

connector deflector assembly area,

base of cleaner and fan housing

area. If there is dust in the outer bag, vacuum it or shake it out.

A little preventative maintenance will keep your cleaner looking new and will ensure continued cleaning effectiveness.

CAUTION—Wood Floors, Soft (Vinyl, Asphalt Tile, etc.) Floor Surfaces and Polished Floor Finishes

Use floor and floor finish manufacturer’s recommended methods of cleaning. The metal strip on the base of the cleaner could be damaged if used on concrete or abrasive surfaces, and, therefore, cause damage to wood floors, soft (vinyl, asphalt tile, etc.) floor surfaces and polished floor finishes. The roller brush may also scuff very soft finishes. Do not operate the unit while in the upright and locked position. Do not let the unit run while in any one stationary position for any period of time. Keep the unit moving while in operation.

To Replace Filter

Dust Bag

 

WARNING: Unplug cord from

 

electrical outlet before servicing.

 

BAG INSTALLATION:

 

1. Hook bottom of bag collar

 

opening under lip “B” of

A

connector assembly. Pull up

 

on bag collar and snap over

B

lip “A” of connector.

 

2. Press on edges of bag collar

 

to insure bag is completely

 

installed.

IMPORTANT: Check to make sure bag collar is behind lips “A” and “B”. If it is not, dust will leak into outer bag. When filter bag is in place, close outer bag with zipper fastener.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents XL2070RHSM Accessories Sold Separately Table of ContentsMaintenance Customer Service Save Service CALLS...CHECK These First WarrantyTroubleshooting Guide Assembly Operating Instructions Installed Lip a of connectorHook bottom of bag collar Opening under lip BRemove the replacement belt from the storage channel How to Replace a Worn BeltStuffing or Blockage Retainer SpringTo Adjust or Replace Brush 05/05 ECN# R-8018

XL2070RHSM specifications

The Oreck XL2070RHSM is an advanced upright vacuum cleaner designed to deliver powerful performance and ease of use, making it an ideal choice for both residential and commercial cleaning needs. This model boasts a variety of features and technologies that set it apart from other vacuum cleaners in its class.

One of the standout characteristics of the Oreck XL2070RHSM is its ultra-lightweight design, weighing in at just 8 pounds. This lightweight construction makes it easy to carry and maneuver around furniture and tight spaces, reducing strain on the user's body during cleaning tasks. With its slim profile, the vacuum can effortlessly navigate through various home environments, ensuring that every nook and cranny is reached.

This model features a powerful 102 mph airflow, which is essential for picking up dirt, dust, and debris from carpets and hard floors alike. The Oreck XL2070RHSM utilizes a high-speed roller brush that effectively agitates carpet fibers, allowing for deeper cleaning without damaging delicate surfaces. This vacuum is designed with a dual-speed motor, enabling users to adjust the suction power according to the cleaning surface. The "Floor" setting is perfect for hard surfaces while the "Carpet" setting provides enhanced suction for deeper cleaning on carpets.

One of the significant features of the Oreck XL2070RHSM is its multi-layer filtration system. Equipped with an inner bag and a HEPA filter, it captures 99.97% of particles as small as 0.3 microns, including allergens like dust mites, pollen, and pet dander. This filtration system is particularly beneficial for allergy sufferers and contributes to improved indoor air quality.

In addition, the Oreck XL2070RHSM comes with convenient features such as a 40-foot power cord, which allows for extended reach without constantly switching outlets. The vacuum also features an easy-to-empty dust bag that can hold more dirt than many competitor models, reducing the frequency of bag changes and simplifying maintenance.

Overall, the Oreck XL2070RHSM combines lightweight design, powerful suction, smart filtration, and user-friendly features to provide a versatile and effective cleaning solution for a variety of spaces. Its blend of advanced technologies and practical design elements make it a reliable choice for anyone looking to maintain a clean and healthy environment.
Top Page Image Contents