To Adjust or Replace Brush

	5. Many times blockage occurs	F
	due to a full dust bag	F
	due to a full dust bag	Connector
	causing dirt to back down	Connector
	the air flow system. When	Deflector
	the air flow system. When	Opening
	that happens, the blockage	Opening
	that happens, the blockage
	will be at the top of the
	system, starting in the area

WARNING: Unplug cord from electrical outlet before servicing.

where the dust bag connects
to the connector assembly.
See illustration F.
NOTE: If the above actions do not correct the problem, contact
an ORECK authorized service center or call the commercial
customer service center.	Commercial: 1-800-242-1378
Hospitality: 1-888-23-ORECK	Canada: 1-866-746-7325

IMPORTANT: On plush and new carpets, stuffing may occur due to excessive fuzz and loose cuttings in the carpet. Stuffing could occur for the first few cleanings until all the loose material is removed. Due to the high efficiency of the cleaner, many older carpets will cause stuffing when the cleaner is first used on them.

Using an Oreck

Fresh Air® Tab

Your ORECK XL vacuum cleaner has a special Oreck Fresh Air® tab pocket. This pocket is located inside the outer bag in the area where the paper disposable bag attaches to the intake tube. Insert tablet in pocket.

Grounding Instructions

Rotate and match

bearing assemblies

To determine if the brush is worn, place a firm straight edge across the nozzle opening. If brush bristles do not extend beyond baseplate, brush should be adjusted.

Remove the baseplate by removing 5 screws. Then, remove the belt and brush roll from the housing.

Rotate both bearing assemblies at ends of brush roll to show “old” and replace in the holding channels in the housing.

NOTE: The bearing assembly setting marked “OLD” has a smooth side on the end card. The one marked “NEW” has a notched side on the end card. When rotating bearings, make sure both bearing assembly settings are the same and face up when replacing the brush roll.

This appliance must be grounded. If it should malfunction or break down, grounding provides a safe path of least resistance for electrical current, reducing the risk of electric shock. The cord for this appliance has an equipment-grounding conductor and a grounding plug. It must only be plugged into an electrical outlet that is properly installed and grounded in accordance with all local codes and ordinances.

DANGER: Improper connection of the equipment-grounding conductor can result in a risk of electrical shock. Check with a qualified electrician or service person if you are in doubt as to whether the outlet is grounded. If not, have a proper outlet installed by a qualified electrician.

This appliance is for use on a nominal 120-volt circuit. It has a grounding plug similar to the example shown. Make sure the appliance is connected to an outlet with the same configuration as the plug. No adapter should be used with this appliance.

Grounding Pin

Grounded Outlet

IMPORTANT: Unless the brush is worn, as indicated above, both bearings must be in the “new” position. When rotating, both bearings must be in the “old” position. Unmatched settings will cause damage to your machine.

Reassemble the belt and the baseplate and check bristle height above baseplate at each end of brush.

If a previous adjustment has already been made and bristle height does not extend above baseplate, a new brush assembly should be ordered.

XL2070RHSM specifications

The Oreck XL2070RHSM is an advanced upright vacuum cleaner designed to deliver powerful performance and ease of use, making it an ideal choice for both residential and commercial cleaning needs. This model boasts a variety of features and technologies that set it apart from other vacuum cleaners in its class.

One of the standout characteristics of the Oreck XL2070RHSM is its ultra-lightweight design, weighing in at just 8 pounds. This lightweight construction makes it easy to carry and maneuver around furniture and tight spaces, reducing strain on the user's body during cleaning tasks. With its slim profile, the vacuum can effortlessly navigate through various home environments, ensuring that every nook and cranny is reached.

This model features a powerful 102 mph airflow, which is essential for picking up dirt, dust, and debris from carpets and hard floors alike. The Oreck XL2070RHSM utilizes a high-speed roller brush that effectively agitates carpet fibers, allowing for deeper cleaning without damaging delicate surfaces. This vacuum is designed with a dual-speed motor, enabling users to adjust the suction power according to the cleaning surface. The "Floor" setting is perfect for hard surfaces while the "Carpet" setting provides enhanced suction for deeper cleaning on carpets.

One of the significant features of the Oreck XL2070RHSM is its multi-layer filtration system. Equipped with an inner bag and a HEPA filter, it captures 99.97% of particles as small as 0.3 microns, including allergens like dust mites, pollen, and pet dander. This filtration system is particularly beneficial for allergy sufferers and contributes to improved indoor air quality.

In addition, the Oreck XL2070RHSM comes with convenient features such as a 40-foot power cord, which allows for extended reach without constantly switching outlets. The vacuum also features an easy-to-empty dust bag that can hold more dirt than many competitor models, reducing the frequency of bag changes and simplifying maintenance.

Overall, the Oreck XL2070RHSM combines lightweight design, powerful suction, smart filtration, and user-friendly features to provide a versatile and effective cleaning solution for a variety of spaces. Its blend of advanced technologies and practical design elements make it a reliable choice for anyone looking to maintain a clean and healthy environment.