Morphy Richards 47160 Temperature Indicator light, Sleep mode, E.S.E. Pods, Care and cleaning

Models: 47160

1 12
Download 12 pages 17.53 Kb
Page 7
Image 7
Temperature Indicator light

Sleep mode 47160 rev3_Layout 1 02/09/2011 13:57 Page 7

Temperature Indicator light

The Temperature Indicator Light (9) flashes slowly when the boiler is heating, this is normal.

The Temperature Indicator Light will flash fast and the coffee maker will not work when there is a problem. If this occurs check;

The water tank is full and correctly installed.

The steam control is set to off.

Any air locks have been removed.

Sleep mode

Please note your coffee maker has a sleep mode to save energy. If your coffee maker is not used for 8 minutes, your coffee maker will enter sleep mode. The Temperature Indicator Light (9) flashes slowly in this mode.

To wake the machine, slide and release either the one (6) or two cup (7) switch.

Using the correct type of coffee grinds

When making espresso coffee it is important to use the correct type of coffee grinds. Espresso coffee is a very fine grind which is designed to work with espresso filters. Using other types of coffee in an espresso filter (such as filter coffee grinds,) will result in a poorer tasting coffee and could clog the filter.

Likewise when making filter coffee you should use filter coffee grinds to achieve the best results. Using espresso grinds can cause the filter to clog and overflow.

E.S.E. Pods

The coffee maker is compatible with both E.S.E. pods (a compact coffee pod with a paper filter covering,) as well as ground espresso coffee. When making espresso with an E.S.E. pod, use the One Cup/ E.S.E Pod Filter (26).

Adjusting the height of the

Drip Tray

You can adjust the height of the Drip Tray to reduce splashing when dispensing coffee into smaller cups such as espresso cups.

Press the two Drip Tray Adjustment Buttons (15) to release the spring catch and raise or lower the drip tray.

Emptying the Drip Tray

When the water in the Drip Tray is full, the Empty Drip Tray Level Indicator (16) will change colour.

1Remove the Drip Tray (11) from the appliance and empty.

2Clean the Drip Tray with a damp cloth before replacing.

Care and cleaning

1Disconnect the appliance from the mains supply.

2Make sure the appliance has completely cooled down.

3Simply wipe the Steam Wand (2) and exterior with a clean, damp cloth.

Do not use any abrasives or metal scourers as this will damage the finish on the unit.

4The Espresso Filter Holder (24) and Espresso Water Tank (13) should be washed after each use by rinsing them under water. To assist in keeping

7

Page 7
Image 7
Morphy Richards 47160 manual Temperature Indicator light, Sleep mode, Using the correct type of coffee grinds, E.S.E. Pods